club.liberty.asn.au

Please see below for reference on what bulbs are needed for your gen 4 liberty. Hopefully this covers all models. If there's a variation I've missed out please let me know below so I can complete the list.

I will expand on this list gradually, with recommendations on bulbs and suggestions on what styles fit/work best for upgrades.

Any install guides for reference can be linked (or post it as a comment) and I'll add it to the second post.

The third post will be for FAQ's.

Please feel free to use this thread for any questions you have that are relevant. Any errors, please let me know.

Interior
All Models
Dome: 31mm Festoon (Can fit 2 24x5050 SMD Panels)
Map Light: 31mm Festoon (Can fit 24x5050 SMD Panel)
Door Courtesy Light: 31mm Festoon
Boot Light (Sedan): W5W (T10)
Cargo Area (Wagon): ???

Exterior
Pre-Facelift (MY04-MY06) Sedan
Low Beam: H7 **Take care changing this as the bulb retaining clip is delicate**
High Beam: HB3
Front Parker: W5W (T10)
Front Indicator: WY21W (T20, 7440)
Front Fog Light: H3
High Mount Brake Light: W21W (T20, 7440)
Brake Light: W21W (T20, 7440)
Brake/Tail Light: W21/5W (T20, 7443, dual filament)
**NOTE: Rear bulbs may be different for models with rear fog lights**
Rear Indicator: WY21W (T20, 7440)
Reverse Light: W16W (T15)
License Plate Light: W5W (T10)

Pre-Facelift (MY04-MY06) Wagon
Low Beam: H7 **Take care changing this as the bulb retaining clip is delicate**
High Beam: HB3
Front Parker: W5W (T10)
Front Indicator: WY21W (T20, 7440)
Front Fog Light: H3
Brake/Tail Light: W21/5W (T20, 7443)
Rear Indicator: WY21W (T20, 7440)
Reverse Light: W21W (T20, 7440)
License Plate Light: W5W (T10)

Facelift (MY07-MY09) Sedan
Low Beam (HID): D2S
Low Beam (Non-HID): H7
High Beam (HID): HB3
High Beam (Non-HID): H9
Front Parker: W5W (T10)
Front Indicator: WY21W (T20, 7440)
Front Fog Light: HB4
High Mount Brake Light: W21W (T20, 7440)
Brake/Tail Light: W21/5W (T20, 7443, dual filament)
Rear Indicator: WY21W (T20, 7440)
Reverse Light: W16W (T15)
License Plate Light: W5W (T10)

Facelift (MY07-MY09) Wagon
Low Beam (HID): D2S
Low Beam (Non-HID): H7
High Beam (HID): HB3
High Beam (Non-HID): H9
Front Parker: W5W (T10)
Front Indicator: WY21W (T20, 7440)
Front Fog Light: HB4
Front Fog Light (Outback): H3
Brake/Tail Light: W21/5W (T20, 7443, dual filament)
Rear Indicator: WY21W (T20, 7440)
Reverse Light: W21W (T20, 7440)
License Plate Light: W5W (T10)

To be completed

Can I install HID lights in my non-HID headlights?
Yes, but to meet ADR HID lights require projectors, auto-levelling and headlight washers so it won't be legal.

How do I tell if I have HID lights standard?
HID lights were only available on some facelift models, including all Spec B, all tbSTi models, GT premium models and possibly others. These headlights can be identified by the chrome rectangular headlight washer on the bottom corner of the headlight, nearest to the grille.

I broke the bulb retaining clip on my pre-facelift low beam, what can I do?
This is a part of the headlight assembly so the entire headlight needs to be replaced. Some people have managed to secure the bulb using wire and other methods.

Nice!

I can confirm that the 31mm festoon fits in the door courtesy lights.

I feel like reference needs to be made to the fact that pre-fl have very fragile bulb retaining brackets.. That one pops up every now and then.

zch91 wrote:I feel like reference needs to be made to the fact that pre-fl have very fragile bulb retaining brackets.. That one pops up every now and then.

Do they ever. That gave me a headache for a good day when trying to install my HIDs

Thanks Sean! Saves me measuring

Yeah I've seen that a few times Zach, is it the low beam or high beam that tends to do it?

Low beam.

Cargo Area (Wagon): W5W (T10) on mine

Will that be W5W (T10) on all wagons then?

Thanks Daniel! Used this to order myself LED replacements for the number plates.

There are some bulbs missing that i'm trying to figure out what they are (haven't pulled apart the assembly yet)

They basically are Green/Red ones that come on when passengers (don't) have their seatbelts on which is near the sunroof controls.

Just recently bought a globe for my 2006 3.0rb (h7 globe) and itsee completely different to the stock one

3.0rblife wrote:Just recently bought a globe for my 2006 3.0rb (h7 globe) and itsee completely different to the stock one

What is your current one?

Great guide, thanks

I’d recommend Blingworks over your side of town for bulbs etc.
Got my silvered turns and mega bright reverse leds there.