Page 1 of 1

Remove window moulds gen4

PostPosted: Fri Jan 25, 2013 7:27 pm
by Newbie GT
As it says rubber strips that sit on top of doors against windows.

Thank you

Re: Remove window moulds gen4

PostPosted: Fri Jan 25, 2013 9:43 pm
by Mat04
Grab hold and pull down towards floor.

Re: Remove window moulds gen4

PostPosted: Fri Jan 25, 2013 10:08 pm
by mynameisdaniel
Remove your door trims, there's two screws at either end that need to be undone (clips commonly break). Then there's two clips along the length of the strip that simply pull off, just be careful not to bend the window mould when you do it by pulling up right on the clips.

Re: Remove window moulds gen4

PostPosted: Fri Jan 25, 2013 10:15 pm
by Newbie GT
mynameisdaniel wrote:Remove your door trims, there's two screws at either end that need to be undone (clips commonly break). Then there's two clips along the length of the strip that simply pull off, just be careful not to bend the window mould when you do it by pulling up right on the clips.


Thanks Dan exactly what I'm after !! Big job to remove trims to get these off I want to try restore them they are faded and scratchy
Mat I think you may be referring to another part ...

Re: Remove window moulds gen4

PostPosted: Sat Feb 02, 2013 11:27 pm
by Mat04
Yeah sorry I thought you meant rubber strip that goes around door frame.