door trim removal
Posted:
Mon Sep 17, 2012 1:11 pmby mattyzero00
I'm sure this question had been answered but can't find it any were ...how do I remove the front and rEar door trims on a liberty gen 4.....pictures would help
Re: door trim removal
Posted:
Mon Sep 17, 2012 1:31 pmby bates91
http://iagresearch.com.au/index.php?opt ... iew&gid=44once the three screws are out you just need to pull gently from the bottom and the clips will pop out
Re: door trim removal
Posted:
Mon Sep 17, 2012 9:26 pmby mattyzero00
Ok I can't find any screws are they behind the handle
Re: door trim removal
Posted:
Mon Sep 17, 2012 9:32 pmby seanmau5
Get yourself a trim removal kit, the pull handle cover pops off by prying it at the top.. There is another cover in behind the handle you pull to open the door, there is a little notch at the top which you pry out also. Once that's done undo the screws and pull at the trim at the bottom.
Don't forget to disconnect the courtesy light & you'll also need to undo the 4 screws holding in the handle to open the door (if that makes sense).
I have a walkthrough I can email you if need be.
Re: door trim removal
Posted:
Mon Sep 17, 2012 10:29 pmby mattyzero00
Yeah it kind of makes sense but the walk through would be great thanks
Re: door trim removal
Posted:
Mon Sep 17, 2012 10:37 pmby seanmau5
mattyzero00 wrote:Yeah it kind of makes sense but the walk through would be great thanks
Click the link posted above ^^^ it's more or less the same as what I've got
Re: door trim removal
Posted:
Mon Sep 17, 2012 10:44 pmby mattyzero00
Sorry can't see a link on my screen
