Page 1 of 1
Brembo Bolt Size?
Posted:
Tue Sep 04, 2012 10:12 pmby kiko.man
Would anybody know the bolt sizes (both front and rear) for the bolts that hold the calipers together?
Can't seem to find info on this, thanks in advance!
Re: Brembo Bolt Size?
Posted:
Tue Sep 04, 2012 10:21 pmby cruisn
Fronts are 12x1.75 x 40mm.
Rears are 10x1.5 x 25mm.
Re: Brembo Bolt Size?
Posted:
Tue Sep 04, 2012 11:42 pmby kiko.man
Thanks a bunch Mark!
Re: Brembo Bolt Size?
Posted:
Tue Sep 04, 2012 11:49 pmby cruisn
Rear bolts were supplied with the adapters?
Re: Brembo Bolt Size?
Posted:
Tue Sep 04, 2012 11:51 pmby kiko.man
Yes they were. I was just trying to finding out the size of the bolts on the actual caliper that holds the two pieces together.
Re: Brembo Bolt Size?
Posted:
Tue Sep 04, 2012 11:56 pmby cruisn
The bolts supplied bolt the adapter to the caliper.
The adapter then mounts to the backing plate with the bolts you removed from standard calipers.
You will have to bend back or remove the dust shield.
Re: Brembo Bolt Size?
Posted:
Wed Sep 05, 2012 12:10 amby kiko.man
Sorry Mark I just realized I should've worded it better, the bolt size I'm looking for are for the "bolts on the actual caliper that hold the 2 sides of the caliper together, 4 in total on each corner"
Re: Brembo Bolt Size?
Posted:
Wed Sep 05, 2012 7:31 amby cruisn
Ahhhhh ok.
Maybe silly question, but can't you just remove and check from your calipers?
Re: Brembo Bolt Size?
Posted:
Thu Sep 06, 2012 11:02 amby kiko.man
i was hoping not to disassemble the caliper but it looks like i will, might as well learn something new anyway
