club.liberty.asn.au

As above any tips on how to adjust once lowered as I am guessing lights will point down after lowering

Coilovers in the mail

Unfortunately this post is so old it seems to have been archived so I can no longer link to it but here are the pics that Arith put up back in 2008

Arith wrote:Overhead view of driver side headlight. Circled are the adjustment points which sit behind the headlight housing. The intake duct will need to be removed to access the inner adjustment point.


Insert a philips screwdriver in between the teeth and the housing, and twist to adjust. In this case, the left and right adjustment. Turn on your headlights and keep an eye on the focal point and it moves.

A close-up of the outer adjustment point. Note the arrows which indicate this will adjust the headlights left and right. The inner adjustment point should have an indicator to say it adjusts the up and down.

And here is the guide on how they should be correctly adjusted



Hope this helps

Cheers Kieran
I have noticed these adjusters but I thought because they are auto leveling I would have to adjust the switch under the rear

Ahh sweet, I was looking for this.

Anyone know what to do with the leveling switch under the rear