club.liberty.asn.au

Any pointers on how to do this on a Gen 4 3RB? I can change every other fluid on my car,figure it's time i learn how to do this.

Cheers,

Cliffo

Same way you bleed brake fluid, 2 people. one holds the pedal down, the other cracks the bleed nipple on the slave cylinder, release pressure, then tighten nipple. raise clutch pedal and repeat.

the clutch pedal will need to be pulled up by hand as there will be no pressure in the system to spring it back to its normal position. after bleeding pump it a few times by hand and it should be good again.

Legend.

Another question i didnt need to ask cheers