Page 1 of 1
Help clear CEL - Melb

Posted:
Fri Apr 06, 2012 1:24 pm
by Harrybob
Is anyone in Melbourne able to help me clear a CEL, or tell me if it is something I can do myself?
Re: Help clear CEL - Melb

Posted:
Fri Apr 06, 2012 1:31 pm
by bass_straitener
Any idea why you're car has a CEL.
And whereabouts in Melbourne are you located so that perhaps someone close to your location can contact you.
If out east I'm happy to take a look though I've never hooked Learning View up to the Subaru 6. Though it should work.
Re: Help clear CEL - Melb

Posted:
Fri Apr 06, 2012 1:42 pm
by Harrybob
Unplugged maf and started the car for about a minute before realizing.
I'm in Clayton but am willing to travel.
I understand it's good Friday and the long weekend so wasn't really expecting anyone to be available but thought I'd try.
Re: Help clear CEL - Melb

Posted:
Fri Apr 06, 2012 1:59 pm
by bass_straitener
Not too far at all.
Should be an easy fix.
I've PMd you my number call me and come over today if convenient as tomorrow I'm a bit busy.
Re: Help clear CEL - Melb

Posted:
Fri Apr 06, 2012 3:46 pm
by bass_straitener
Done!
Another happy camper.

Re: Help clear CEL - Melb

Posted:
Fri Apr 06, 2012 4:19 pm
by Harrybob
bass_straitener wrote:Done!
Another happy camper.

Thanks for all your help Bruce.
Love the way your car has been tastefully modded.
Re: Help clear CEL - Melb

Posted:
Fri Apr 06, 2012 5:55 pm
by bass_straitener
You're welcome!
Nice to meet you too.
Your call looks sweet with some nice tasteful mods.
Come to some of the meets and check some pretty special H6 Libs with superchargers and talk to the guys about their tuning experiences.
Re: Help clear CEL - Melb

Posted:
Thu Apr 12, 2012 11:14 am
by jp928
Dont CELs like that clear after 5 starts and error doesnt recur?
jp 08 gtb 6mt wagon
Re: Help clear CEL - Melb

Posted:
Thu Apr 12, 2012 11:26 am
by bass_straitener
Not sure on that one JP. I do know some are supposed to, but HarryBob has a H6 so I couldn't rear his error code to research it.
I could only reset the ECU with Learning View.
I would've thought however he would have had restarted the car five times when trying to sort out the issue as he did receive other advice from members. He doesn't live far from me hence I offered the ECU reset if he knew exactly what he'd done wrong to trigger the CEL.
Re: Help clear CEL - Melb

Posted:
Fri Apr 13, 2012 8:32 am
by 3rspecb
jp928 wrote:Dont CELs like that clear after 5 starts and error doesnt recur?
jp 08 gtb 6mt wagon
Some do but not all. I think its like 7 starts but not 100%.
Re: Help clear CEL - Melb

Posted:
Fri Apr 13, 2012 8:37 am
by 3rspecb
Harrybob wrote:Unplugged maf and started the car for about a minute before realizing.
I'm in Clayton but am willing to travel.
I understand it's good Friday and the long weekend so wasn't really expecting anyone to be available but thought I'd try.
You can clear this CEL with 5-7 starts, I did this once and my mechanic freind (ex sti docklands foremen) cleared the CEL via this method.
Re: Help clear CEL - Melb

Posted:
Fri Apr 13, 2012 9:44 am
by Harrybob
I tried the restarting the car 10 times in succession after reading it somewhere else on the forum and the CEL still remained

Re: Help clear CEL - Melb

Posted:
Fri Apr 13, 2012 11:15 am
by Robbks
Harrybob wrote:I tried the restarting the car 10 times in succession after reading it somewhere else on the forum and the CEL still remained

I had a similar issue this week with a BIU error after trying to start the car with a flat battery (shows up on odometer) that wouldn't clear.
complete disconnect of battery and re-connect sorted it
if it still remains after that then you most likely need to attend to what ever is causing the CEL