Page 1 of 1

cargo blind plastic pegs

PostPosted: Tue Mar 27, 2012 12:26 pm
by bigrich
anyone know where to find the pegs that keep the cargo blind extending (the bits that hook into the car) for 2000 liberty wagon?? one of mine has broke and makes the cargo blind flip open when driving..?

Cheers..

Re: cargo blind plastic pegs

PostPosted: Tue Apr 03, 2012 3:24 pm
by jp928
If you have the broken off part, stick it back together. Drill a 1.5mm hole in each side of the break, as centrally as possible, get a stiff piece of wire (a broken drill ?), assemble, super glue. Note that if you are trying to superglue two parts that dont meet well and the glue wont go off, fill the gap with baking powder, then drop superglue on it - the powder triggers the glue to go off VERY quickly (avoid the cyanide vapour), and it will stay together. Only down side is the join will be brittle, wont tolerate much biffing.
jp 08 gtb 6mt wagon

Re: cargo blind plastic pegs

PostPosted: Tue Apr 03, 2012 3:39 pm
by cruisn
Take your vin number to Subaru and buy one?

Otherwise wreckers.