help! car wont lock n constantly beeps

by **ncmx5** » Tue Nov 20, 2007 12:55 am

i was installing my amp & subs today and it was all going well until i connected the negative wire to the batt terminal. then the car continously beep beep beep - no stop! no warning lights came up. its still drivable, i took it around the block to check if its anything else. no only that, it wont lock as well. it would lock then automatically unlock. no usual flashing of the indicator lights. and the boot release on the remote doesnt work either. i cant manually lock the car using the key either . i dont know what to do. i have to go to work tomoroo and obviously lock the car!

by **tangcla** » Tue Nov 20, 2007 6:40 am

Now would NOT be a good time to post where you live and what your license plates are :lol:

by **gt_dicko** » Tue Nov 20, 2007 7:43 am

Get a big ass dog to leave in the car :lol:

by **Ric** » Tue Nov 20, 2007 8:22 am

This is a guess.
I think you may be feeding 12 volts back into the Accessory or ignition circuit, so when you try to lock the car, it thinks the keys are still in the ignition!

Obvious answer is try disconnecting all power to the amp and sub for now.

by **tangcla** » Tue Nov 20, 2007 8:56 am

So are you at work now?

by **ncmx5** » Tue Nov 20, 2007 8:57 am

brought it to suby doncaster. theres a plug under the footwell of driver side which is supposed to be UNPLUGGED - i plugged it together thinking that i took it out earlier. anyway, unplugging that solved everything! =D 5 stars to suby donny.

haha... i can tell u my rego now. =p

by **tangcla** » Tue Nov 20, 2007 9:27 am

hmm, who would have guessed - a plug that was MEANT to be unplugged?!

Did you ask them what the plug was?

by **Ric** » Tue Nov 20, 2007 10:30 am

I've heard of that plug. Connecting them puts the instrument panel into a test mode. You have to do a few other things in sequence, then the odometer/tripmeter will start displaying ECU error codes.
I guess it doesn't let you lock the car in that mode, to remind you to unplug it afterwards.

by **viriix** » Tue Nov 20, 2007 11:51 am

Ric,

Might be an idea to move this away to be safe..

It's a bit of a security flaw that you wouldn't want people to know, especially if they need a free car

by **tangcla** » Tue Nov 20, 2007 12:05 pm

but you have to get in before you can put it in that mode...

by **SkoobyGT** » Tue Nov 20, 2007 12:26 pm

People that want to steal a Subaru, know how to steal a Subaru, and will get in no matter what.

Kids that do 80% of break in and steal cars will usually jam a screwdriver or smash a window.

Hiding all these threads with these little 'problems' doesn't benefit anyone, because when we have the same problem I won't know what to do.

:wink:

by **fish_boy79** » Tue Nov 20, 2007 1:37 pm

Ric wrote:I've heard of that plug. Connecting them puts the instrument panel into a test mode. You have to do a few other things in sequence, then the odometer/tripmeter will start displaying ECU error codes.
I guess it doesn't let you lock the car in that mode, to remind you to unplug it afterwards.

ric the plug you're thinking about is in the fuse box next to your leg.

by **ncmx5** » Tue Nov 20, 2007 1:43 pm

the service guy told me that this was used to reprogram codes for the key fob its not in the fuse box, its under it behind the kick panel.

by **viriix** » Tue Nov 20, 2007 2:36 pm

you never know...

I'll just visit Ed and steal his car..

That'll fund some nice upgrades, oh.. i'd be willing to share and group buy xD

by **sinist4** » Tue Nov 20, 2007 6:21 pm

viriix wrote:you never know...

I'll just visit Ed and steal his car..

That'll fund some nice upgrades, oh.. i'd be willing to share and group buy xD

my cars got a special fuse box with nothing in it, so theres nothing to unplug :lol:

help! car wont lock n constantly beeps

help! car wont lock n constantly beeps

Who is online