Door lock fell inside door

Ask for help with doing something on your car here.

Door lock fell inside door

Postby Humehwy » Tue Mar 06, 2012 12:19 pm

I have recently purchased a used liberty rx 2.5 99 model its a great car but the door lock fell inside the door usually there is a u shapped clip that retains the lock in other cars, i had a look cant see a clip in the door rang spares there not certain anyone know
Humehwy
 
Posts: 1
Joined: Tue Mar 06, 2012 12:07 pm
Car: 2.5 rx 1999 liberty sedan

Re: Door lock fell inside door

Postby HyRax » Thu Mar 08, 2012 5:22 pm

I had this exact same thing happen to me with my old MY01 Liberty RX.

You have to pull the door trim off and really reach inside to the bottom of the door void, right into the mucky stuff sitting at the bottom. The clip WILL be there, somewhere.

Putting the lock back on is a right pain, though (at least on the MY01 it was - you have to remove the glass to get proper access to slide the clip back on).

Failing that, any workshop could fashion a replacement clip for you - there is nothing particularly special about it. You could also check out a wrecker.

In my case I paid a local mechanic $50 to refit it for me because I didn't want to deal with moving the glass. Good as new.
I was going to procrastinate, but I put it off...
User avatar
HyRax
 
Posts: 1202
Joined: Sat Jul 30, 2011 12:25 am
Location: Sydney
Car: ADM MY19 3.6R Outback
Real name: Jeff
Profile URL: viewtopic.php?f=10&t=15482


Return to How do I?

Who is online

Users browsing this forum: No registered users and 4 guests