interior lights

[LIBER8ED]

hey guys

im looking at upgrading the lights inside the car.. ie map lights, dome light.. ect ect.. so they are a lil brighter than a candle..

is there a kit or anyhting specific i should, can get, or do i just trudge on down to supercheap and get some better globes!??

cheers

[WhiteGTB]

PM the PHAT man...

I got some interior lights from him about two weeks ago.. they are so bright and light up EVERYTHING in the car.

[LIBER8ED]

had already started the pm in anticipation.. cheers

is there anything he cant do?

[XRC15T]

El EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE D's Man

[LIBER8ED]

[ROB-80E]

Are you electronically minded? If so, you might like to look at the Luxion LED's available from Jaycar. Basically the light of a fluro in a 5mm LED.

I have one in my astina, so if you want pics...let me know.

[XRC15T]

Most of the boys have got the LED kits made specifically for the Libertys.
Mike can get them for you

[LIBER8ED]

ha ha ill leave the av tech stuff to you rob. i wouldnt have a clue....

but thanks guys, ill hold out and see if mike can help me out

cheers

[tangcla]

Are you electronically minded? If so, you might like to look at the Luxion LED's available from Jaycar. Basically the light of a fluro in a 5mm LED.

I have one in my astina, so if you want pics...let me know.

yes please! I got a Luxeon globe in my mini Maglite.

[ROB-80E]

Ok, well I don't have the best camera in the world, and is usually very bad in low situations, but this gives you an idea of the light spread, out of one of these things...and for my camera to pick it up, it's bight, i can assue you.

In my setup, i haven't mounted it in the original interior light spot, because mine has been removed due to the fitting of a sunroof. But there is no reason why this wouldn't be able to be done.







This here is what I have used, the over all size of it is about the size of a 10c or $1 coin. There are 4 versions in White...a 1watt White, 1watt Warm White, 3watt White and 3watt Warm white. Warm just means its not as "white". The "white" ones output light like a fluro. I used the 3watt white.



Here is where I got the power supply circuit diagram from. You can buy specific little power supplies for them, but at a cost of $30 compared to $6, i built my own. However, the transistor/FET listed to be used on this site aren't available easily, but there are substitutes that I chased up. Again, anyone really interested in going this way, i can get you the part numbers of the parts i used.

http://www.instructables.com/id/Circuit ... wer-LED_s/