Hey guys,
Just wondering if removing the passenger seat is a tough job. Are their airbags in a 2.5i that i need to be careful of or any other electrics?
Cheers!
Australian Liberty Owners Club
Removing Passenger Seat
2 posts
• Page 1 of 1
Removing Passenger Seat
by rever » Thu Sep 01, 2011 11:46 pm
- rever
- Posts: 165
- Joined: Mon Dec 07, 2009 6:16 pm
- Location: Melbourne
- Car: 2005 Liberty 2.5i
- Real name: Nathan
Re: Removing Passenger Seat
by cruisn » Fri Sep 02, 2011 4:03 pm
Easy 10 minute job.
Disconnect the battery FIRST if you have side airbags in the seat.
There are 4 14mm bolts holding the seat down, slide the seat all the way back and undo the front two.
Slide the seat all the way forward, remove the plastic covers at the rear, remove the bolts under them.
Tilt the seat back and disconnect all plugs under the seat (seatbelt indication, airbags)
Lift out.
Disconnect the battery FIRST if you have side airbags in the seat.
There are 4 14mm bolts holding the seat down, slide the seat all the way back and undo the front two.
Slide the seat all the way forward, remove the plastic covers at the rear, remove the bolts under them.
Tilt the seat back and disconnect all plugs under the seat (seatbelt indication, airbags)
Lift out.
-
cruisn - Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 6 guests