Page 1 of 1
For all you guys with the Hyperflow TMIC
Posted:
Tue Jul 26, 2011 9:17 amby legacydan
So i have yet to get my hyperflow sitting properly without ether side leaking, seems like now i have got it down to just the throttle body side thats leaking, what clamps are you guys using with the hyperflow? If anything other than standard let me know! Im currently trying the Murray constant tension clamps, but seems a bit wide for my stock throttle body hose and its leaking a bit. Might have gotten it tightened down today, but just looking for other clamping options i could try if this fails
Re: For all you guys with the Hyperflow TMIC
Posted:
Tue Jul 26, 2011 10:24 amby cruisn
Mine fitted straight up with the factory hose clamps and no leaks. Stock boost though. What boost level are you running? Or does it leak all the time?
Re: For all you guys with the Hyperflow TMIC
Posted:
Tue Jul 26, 2011 7:14 pmby hks180
while on the topic of hyperflow TMIC...
recently one of the forum member noticed the car wasn't running right and its getting worse by the day ...
and this is what we found .. he had these on the car 4 yrs ?!? maybe more .. so i think its a good idea to check next time people have boost issue ... another place for you to check ..
Leo
Re: For all you guys with the Hyperflow TMIC
Posted:
Wed Jul 27, 2011 7:21 pmby Dropz
You could get that cleaned up and rewelded, just go somewhere you trust to do a good job.
Re: For all you guys with the Hyperflow TMIC
Posted:
Wed Jul 27, 2011 10:34 pmby hks180
Dropz wrote:You could get that cleaned up and rewelded, just go somewhere you trust to do a good job.
phat man fixed it on the spot ...
Leo
Re: For all you guys with the Hyperflow TMIC
Posted:
Thu Jul 28, 2011 12:32 amby Stu
Just fitting my Perrin TMIC at the moment using regular T-bolt clamps. Just having a b1tch of a time with the AVO silicon throttle body to IC pipe
Re: For all you guys with the Hyperflow TMIC
Posted:
Thu Jul 28, 2011 2:09 amby legacydan
Stu wrote:Just fitting my Perrin TMIC at the moment using regular T-bolt clamps. Just having a b1tch of a time with the AVO silicon throttle body to IC pipe
yes it is a piece of shit i binned mine the other night, its way to long and throws the whole angle of the core off in my experience
Re: For all you guys with the Hyperflow TMIC
Posted:
Thu Jul 28, 2011 7:45 amby Dropz
Tried cutting it down a bit?
Re: For all you guys with the Hyperflow TMIC
Posted:
Sun Jul 31, 2011 3:46 pmby 04GTLIB
The AVO silicon hose does require a fair amount of trimming for installation, but it's well worth it in the end.
