club.liberty.asn.au

Posted: **Sat Jul 23, 2011 9:11 am**

I have a 2007 Liberty GT Spec B 2.5t I have been looking at ways to update or change the induction sound on my Liberty I looked at BOV's and everything but I dont think they suit Liberty's too well. I am looking for more of a turbo flutter or intake sounds Any suggestions?

Posted: **Sat Jul 23, 2011 10:29 am**

Best way get turbo flutter is all stainless intake piping with a good bov, best way to get induction noise is pod filter.

Posted: **Sat Jul 23, 2011 2:24 pm**

If you want flutter, remove the BOV, block off the hole in the IC with a plate, block off BOV lines and enjoy your flutter.

Posted: **Sun Jul 24, 2011 1:27 pm**

turbo flutter = less performance..... simple

Posted: **Sun Jul 24, 2011 4:21 pm**

PHAT GT wrote:turbo flutter = less performance..... simple

But flutter pullz all da mad bitchez bro. :lol:

Does the OP understand how you achieve flutter and why it negates performance?

Posted: **Sun Jul 24, 2011 6:14 pm**

I am just looking for a way for my liberty to sound a bit more meaty! I don't want exhausts or anything but maybe something else just not sure what the options are

Posted: **Mon Jul 25, 2011 12:57 am**

turbo flutter is bad for your turbo! ur turbo will fail just like mine did in my S14 200sx!
but if u wanna risk it, take off the vacuum hose that connects onto ur blow off valve and block it with a screw, don't forget 2 block blow off valve also, (where the hose connects to it, simple!
now 4 the intake noise, just buy a pod, u'll need 2 take out the airbox and hold the pod in place with sum kind of support 2 the chassis, the sound is f####n awesome tho,
but keep in mind both these mods are illegal in most states! pod filter is a canary magnet!

Posted: **Mon Jul 25, 2011 1:32 am**

MY-25-GT wrote:I am not after any noise change or anything big and protrusive. Mainly I prefer the look of the twin pipes and the STI stamped in looks great too. The main thing is I dont want to be driving around with two big cannons sticking out the back or for someone else to look at the car and think I am turning it into a wog box.

I remembered this post of yours from ages back. had to dig it up but I remembered it.

You say stuff like that, then you want a turbo flutter?

Buy a decent set of quad tip mufflers (The STi cans are not a decent set IMO) like the PHAT quads or the TCP quads, keep everything else stock.
Then you have something that looks decent, sounds good, is legal and doesn't make you look like you're driving a "wog box"

If you want a little more, HKS panel filter with resonator bottle removed is as good as you are going to get without going against your comment I have just quoted.
If you go the pod filter route, it won't just be you hearing the intake sound like it would be with the panel filter, it will be people in the cars next to you, people walking nearby etc etc.

Posted: **Mon Jul 25, 2011 12:31 pm**

bro, maybe he changed his mind so that's why he wants the turbo flutter now?
if u got the cash, then just experiment with what you want, buy a pod filter or panel filter, then sell whatever you dont like.
as for turbo flutter, u don't need 2 take out blow off valve, just block vacuum hose, if u dont like that, just unblock it + reconnect vacuum hose

Posted: **Tue Jul 26, 2011 9:05 am**

To be honest I dont 100% know what I want, before the liberty I had a 1994 Supra and a 2004 Wrx which on both I had the whole BOV and exhuast etc but I am now working in Real Estate so cant turn up to appointments with a loud exhuast and BOVs big rims etc and as I am new to liberty's I wanted to see what everyone else's thoughts were.

The liberty is just so quiet so I was hoping there was a way to make it sound alittle better when I want to give it but not sound like anything has been done to it when I am working.
I just need some ideas, but I like the sound of

Buy a decent set of quad tip mufflers (The STi cans are not a decent set IMO) like the PHAT quads or the TCP quads, keep everything else stock.
Then you have something that looks decent, sounds good, is legal and doesn't make you look like you're driving a "wog box"

The last thing I want to do is turn my Liberty into "WOG BOX" trust me

Posted: **Sat Jul 30, 2011 5:51 pm**

if you get yourself a pod kit, you'll be happy...
Either k&n typhoon kit as i have or apexi or similar.

steve

Posted: **Sat Jul 30, 2011 11:03 pm**

Why not try a panel filter and resorectomy. Increases induction and BOV noise slightly and for around $70 not too expensive to throw out if you don't like it. Just the panel filter alone gave me some cheap thrills.

Posted: **Sun Jul 31, 2011 1:49 pm**

db1 wrote:Why not try a panel filter and resorectomy. Increases induction and BOV noise slightly and for around $70 not too expensive to throw out if you don't like it. Just the panel filter alone gave me some cheap thrills.

+1.

You can hear the induction in the car with this mod, but not over the top.

Posted: **Mon Aug 01, 2011 10:11 pm**

I have the AVO Intake pipe and pod and AVO BOV.. Its flutter is quite loud however found that the spring was set pretty tight so i have loosened this off so its not so VL spec.