Page 1 of 1
Removing the Cubby Display
Posted:
Sun Mar 13, 2011 9:29 pmby THERB3
Guys I can't remove the Cubby display as I am scared of scratching my dash or the surroundings around the display.
Does anyone know how to budge this thing as it is pretty firm in place. Where do you grab the cubby without feeling that I am going to damage it ?
Re: Removing the Cubby Display
Posted:
Sun Mar 13, 2011 9:44 pmby Gambit
i used a bit of brute force. It should just pull out with a bit of effort.
Re: Removing the Cubby Display
Posted:
Sun Mar 13, 2011 9:48 pmby THERB3
From where do you pull from or do you use a screw driver from the top, sides, bottom ?
Pls explain......
Re: Removing the Cubby Display
Posted:
Sun Mar 13, 2011 10:51 pmby tangcla
Just grab, and pull...
Re: Removing the Cubby Display
Posted:
Mon Mar 14, 2011 1:57 amby THERB3
tangcla wrote:Just grab, and pull...
Grab and pull from where ? Example hands within the cubby hole and pull out or grab it from the cubby door while it's open and pull towards you ?
Re: Removing the Cubby Display
Posted:
Mon Mar 14, 2011 5:05 amby legacydan
grab and from the bottom lip , until it comes out a small bit, then grab from the top edge until that pops out, you can use a credit card or similar to get the initial grip on the bottom edge
Re: Removing the Cubby Display
Posted:
Mon Mar 14, 2011 6:01 amby garbo41610
Not sure if you have done this yet but my advise is DO NOT use a screw driver. Buy yourself a set of proper trim removal tools. You can get them for about $15 off of ebay.