OIL PRESSURE GAUGE

by **LGT-05T** » Mon May 11, 2009 1:36 pm

hey guys,
finally got around to getting my oil pressure gauge but now im stuck and need some advise. it came with a oil pressure solenoid but i don't know were it goes, do i need another adaptor maybe aswell to install this or not? any pics or read ups would be appreciated
cheers steve

by **jp928** » Mon May 11, 2009 3:57 pm

Do you mean 'oil pressure sensor' , rather than solenoid? In which case,it would need to be connected to a T piece with the std idiot light sensor,IMHO.

jp 08 gtb 6mt wagon

by **hks180** » Mon May 11, 2009 5:01 pm

mmmm one way to do this is get your self a sandwich plate so it sit between the oil filter and the bottom of the sump. and you can mount the sensor to the sandwich plate.

Leo

by **LGT-05T** » Mon May 11, 2009 7:44 pm

jp928 wrote:Do you mean 'oil pressure sensor' , rather than solenoid? In which case,it would need to be connected to a T piece with the std idiot light sensor,IMHO.

jp 08 gtb 6mt wagon

yes mate sorry i did, and where would i find that

by **LGT-05T** » Mon May 11, 2009 7:55 pm

that sandwich plate sounds like a better way than the actual t piece but im guessin its not cheap, do you know were i can get one from i seen one once but dont remember which site i was on

by **matty_et** » Mon May 11, 2009 8:26 pm

i think this should fit, pretty cheap too

http://justjap.com/store/product.php?pr ... t=0&page=1

by **LGT-05T** » Wed May 27, 2009 9:59 pm

ok finally in and workin, had to get the sandwich plate, 45 bucks delivered from just jap, apparently couldn't get the t-piece cause the sensor unit still wouldn't fit, not much room next to the alternator or should i say no room at all but everything works well. i will post pics by the weekend.thanks matty_et
cheers steve

OIL PRESSURE GAUGE

OIL PRESSURE GAUGE

Who is online