Short shifter

Ask for help with doing something on your car here.

Short shifter

Postby pplwu » Mon Dec 01, 2008 9:42 am

Hi,

Where can I get a short shifter kits for my 6 Speed 3.0RB?

Thanks!!
User avatar
pplwu
 
Posts: 370
Joined: Mon Oct 22, 2007 1:15 pm
Location: Melbourne
Car: Subaru Liberty 3.0R Spec B
Real name: Patrick

Postby Spec B Wgn » Mon Dec 01, 2008 10:09 am

i run a kart boy short shift kit with bushings ...

check the vendors section.. Pro Speed could possibly source one for you.

They come from the USA so the dollar conversion will hurt unfortunately.
This cowboy walks in to a German car showroom and he says 'Audi!'
User avatar
Spec B Wgn
 
Posts: 1205
Joined: Sat Dec 08, 2007 5:33 pm
Location: About to overtake you..

Postby WhiteGTB » Mon Dec 01, 2008 11:50 am

Spec B Wgn wrote:i run a kart boy short shift kit with bushings ...

check the vendors section.. Pro Speed could possibly source one for you.

They come from the USA so the dollar conversion will hurt unfortunately.


How do you find the kit? Does it make alot of difference in the length of the throw?

I'm considering one also. You run that in your wrx?
User avatar
WhiteGTB
 
Posts: 3233
Joined: Sat Aug 18, 2007 2:41 am
Location: Sydney, NSW
Car: MY07 Legacy GT Spec B 6pd

Short Shifter

Postby pplwu » Mon Dec 01, 2008 11:59 am

I just PMed Pro Speed hopefully I will get some prices soon
User avatar
pplwu
 
Posts: 370
Joined: Mon Oct 22, 2007 1:15 pm
Location: Melbourne
Car: Subaru Liberty 3.0R Spec B
Real name: Patrick

Postby Spec B Wgn » Tue Dec 02, 2008 10:22 am

Trieu wrote:
Spec B Wgn wrote:i run a kart boy short shift kit with bushings ...

check the vendors section.. Pro Speed could possibly source one for you.

They come from the USA so the dollar conversion will hurt unfortunately.


How do you find the kit? Does it make alot of difference in the length of the throw?

I'm considering one also. You run that in your wrx?


they are fantastic mate... no B.S.. i run one in the wrx/sti

the throw is a lot quicker because of the shortage in length but its also a lot more stiifer and direct because of the bushings.. theres no wayward movement , even though this was minimal with the 6 speed.

one of the best mods i ever did...

bit of job though to get the reverse pin out and back in when doing the install though.
This cowboy walks in to a German car showroom and he says 'Audi!'
User avatar
Spec B Wgn
 
Posts: 1205
Joined: Sat Dec 08, 2007 5:33 pm
Location: About to overtake you..


Return to How do I?

Who is online

Users browsing this forum: No registered users and 3 guests