Torque Converter Replacement

Ask for help with doing something on your car here.

Torque Converter Replacement

Postby Martyk » Sat Jan 04, 2020 1:45 pm

Hoping there is a previous thread on this issue.Took the E25 engine out of my 2001 Outback (auto). The torque converter dislodged. On trying to put it back in the wire clip holding the TC shaft to the oil pump shaft dislodged and bent. Am I correct in thinking I now have to remove the oil pump shaft to connect it again to the TC shaft with a new clip? If so is there a special tool or any advice on how I can get the oil pump shaft out? Thanks
Martyk
 
Posts: 1
Joined: Sat Jan 04, 2020 1:24 pm
Car: 2001 Outback Limited

Re: Torque Converter Replacement

Postby bigBADbenny » Sun Jan 12, 2020 7:52 am

See the FSM link in my signature for procedures for your car...
User avatar
bigBADbenny
 
Posts: 9163
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop


Return to How do I?

Who is online

Users browsing this forum: No registered users and 5 guests