Reprogram the clock...?

[Xenon]

So, a month ago I purchased a MY10 Liberty GT Premium Wagon and I have a really stupid question: How do I change the time on the dash clock?

The buttons next to the clock on the dash don't seem to do anything when I press them. The manual says to just press the min/hour button until you get the right time, but the buttons are unlabelled, and pressing either doesn't seem to change anything. I tried when the car was switched off, on accessories, turned on or when driving, and nup, no dice.

The car has the McIntosh stereo which has its own clock, but I don't seem to be able to find the settings for that either. I thought maybe the two are linked and you have to change the settings through the stereo rather than on the dash (hence the buttons being unlabelled), but I cant find any clock settings.

Can anyone help me out with this very simple problem?

[Tonic]

Not sure but from memory press and hold one button (left usually) and then the other (right) button will progress the time. Same on a 3 button clock but the mid and right buttons are separate pd for minutes and hours...
I have one of the screen based things now and changing the time is even harder to get to..

[Victripper]

Its set by the stereo not the clock at all. Shouldn't' really have the buttons that just do nothing and cause confusion.

[fedaykin]

Go to GPS settings, think it's under Navigation settings

[Xenon]

Cheers, I'll check it out.

[Xenon]

Yup, it was in the GPS navigation menus. Thanks for the help.

[fedaykin]

Don't feel too bad, took me a month to finally think of checking the GPS settings. It's in a bit off a strange spot.