Australian Liberty Owners Club

Skip to content

Installing STI Strut Brace

Ask for help with doing something on your car here.
Post a reply

Installing STI Strut Brace

Postby THERB3 » Thu Jan 08, 2015 5:47 pm

Hi guys,

When installing my strut brace is it as easy as unbolt the bolts within the engine bay, install and bolt back up. Or do i need a wheel alignment after.

Sorry for the noob question just making sure. Mine is a little bit different as I have to remove my Tein EDFC motors which are located on top of the coilover.
MY05 Subaru Liberty Wagon 3.0RB Silver 6MT

Modifications:
19" Rays/Volk GT30 Wheels :: Hi Tech Mufflers :: HKS Panel Filter :: STi Front Lip :: 6000K HID Driving/Fog Lights :: LED Parkers/Licence/Map/Dome :: Brembo Package :: V-Tune :: Tein Flex Coilovers & EDFC Controller :: HKC Carbon Bonnet Scoop :: Hanabi Smoked LED Rear Tail Lights :: Eyelids :: Goodridge Braided Lines :: JDM Front Bar :: Corazon Grille :: Pioneer AVH-X8650BT / Alpine PDX5 Amp

Current Plans:Whiteline SwayBars ::
User avatar
THERB3
-stickered-
 
Posts: 1522
Joined: Sun Jun 08, 2008 8:05 am
Location: Melbourne
Car: MY05 Subaru Liberty 3.0RB Wagon
Real name: Hazza
Top

Re: Installing STI Strut Brace

Postby HardwareBoB » Thu Jan 08, 2015 6:23 pm

THERB3 wrote:Hi guys,

When installing my strut brace is it as easy as unbolt the bolts within the engine bay, install and bolt back up. Or do i need a wheel alignment after.

Yep.
User avatar
HardwareBoB
 
Posts: 1579
Joined: Fri Sep 13, 2013 11:52 am
Location: Melbourne
Car: MY05 GT 5MT Wagon
Real name: Matt
Profile URL: viewtopic.php?f=10&t=27514
Top

Re: Installing STI Strut Brace

Postby THERB3 » Thu Jan 08, 2015 6:40 pm

HardwareBoB wrote:
THERB3 wrote:Hi guys,

When installing my strut brace is it as easy as unbolt the bolts within the engine bay, install and bolt back up. Or do i need a wheel alignment after.

Yep.



So i do need a wheel alignment ?
MY05 Subaru Liberty Wagon 3.0RB Silver 6MT

Modifications:
19" Rays/Volk GT30 Wheels :: Hi Tech Mufflers :: HKS Panel Filter :: STi Front Lip :: 6000K HID Driving/Fog Lights :: LED Parkers/Licence/Map/Dome :: Brembo Package :: V-Tune :: Tein Flex Coilovers & EDFC Controller :: HKC Carbon Bonnet Scoop :: Hanabi Smoked LED Rear Tail Lights :: Eyelids :: Goodridge Braided Lines :: JDM Front Bar :: Corazon Grille :: Pioneer AVH-X8650BT / Alpine PDX5 Amp

Current Plans:Whiteline SwayBars ::
User avatar
THERB3
-stickered-
 
Posts: 1522
Joined: Sun Jun 08, 2008 8:05 am
Location: Melbourne
Car: MY05 Subaru Liberty 3.0RB Wagon
Real name: Hazza
Top

Re: Installing STI Strut Brace

Postby zch91 » Thu Jan 08, 2015 6:55 pm

Wheel alignment not required.

But won't hurt either :P
User avatar
zch91
-stickered-
 
Posts: 2665
Joined: Sat Dec 24, 2011 11:12 am
Location: Darwin, NT
Car: MY04 GT Premium - Silver 5EAT
Real name: Zach
Profile URL: viewtopic.php?f=10&t=15397
Top

Re: Installing STI Strut Brace

Postby HardwareBoB » Thu Jan 08, 2015 7:14 pm

hahahah sorry mate I didn't delete enough off the quote - all you are doing is making the chassis stiffer, you are not changing the alignment. You only need a wheel alignment when you do things that affect the alignment - any sort of suspension change.
User avatar
HardwareBoB
 
Posts: 1579
Joined: Fri Sep 13, 2013 11:52 am
Location: Melbourne
Car: MY05 GT 5MT Wagon
Real name: Matt
Profile URL: viewtopic.php?f=10&t=27514
Top

Re: Installing STI Strut Brace

Postby 3rspecb » Mon Jan 12, 2015 3:57 pm

The strut top nuts only need 20nm torque so don't over tighten them, else they'll snap.
MY06 3rspecb manual sedan, Urban Grey- Shockworks Coilovers '- Gone

MY17 SSv Redline, manual sedan, White.
3rspecb
 
Posts: 1342
Joined: Mon Oct 09, 2006 10:59 pm
Location: Melbourne
Car: MY17 SSv Redline
Real name: G
Top
Post a reply

Return to How do I?

Who is online

Users browsing this forum: No registered users and 4 guests

Powered by phpBB® Forum Software © phpBB Group