Gen 4 dash removal

by **barnett32** » Fri Aug 30, 2013 4:47 pm

hi, I have a Gen 4 liberty as a project and the previous owner has tried to install a universal gauge holder on top of the dash... He hacked it to bits. I have found a new dash cheap.I have done a few dash jobs while doin air con repairs... but never a subaru... any good threads on dash removal/refitting?

by **norbs** » Fri Aug 30, 2013 5:30 pm

Hi. You'll find a few good walk throughs on legacygt.com where people have done various interior mods.

Good luck.

by **Mat04** » Fri Aug 30, 2013 8:22 pm

Dash pad itself is easy once all the lower trims are removed. 6 screws into the side of the trans tunnel and 2 bolts up just inside the doors in the sides of dash. If your local to Sydney I could help remove it.

by **barnett32** » Fri Aug 30, 2013 9:12 pm

thanks for your help lads...In brisbane sorry, shame...a subie expert would be handy. Going to attack it next weekend i think.

by **barnett32** » Sun Sep 15, 2013 10:37 am

bossed it out last weekend in 4 hours

Gen 4 dash removal

Gen 4 dash removal

Re: Gen 4 dash removal

Re: Gen 4 dash removal

Re: Gen 4 dash removal

Re: Gen 4 dash removal

Who is online