Would anybody know the bolt sizes (both front and rear) for the bolts that hold the calipers together?
Can't seem to find info on this, thanks in advance!
Australian Liberty Owners Club
Brembo Bolt Size?
9 posts
• Page 1 of 1
Brembo Bolt Size?
by kiko.man » Tue Sep 04, 2012 10:12 pm
- kiko.man
- Posts: 167
- Joined: Mon Mar 28, 2011 5:59 pm
- Location: Sydney
- Real name: Ian
Re: Brembo Bolt Size?
by cruisn » Tue Sep 04, 2012 10:21 pm
Fronts are 12x1.75 x 40mm.
Rears are 10x1.5 x 25mm.
Rears are 10x1.5 x 25mm.
-
cruisn - Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
Re: Brembo Bolt Size?
by cruisn » Tue Sep 04, 2012 11:49 pm
Rear bolts were supplied with the adapters?
-
cruisn - Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
Re: Brembo Bolt Size?
by kiko.man » Tue Sep 04, 2012 11:51 pm
Yes they were. I was just trying to finding out the size of the bolts on the actual caliper that holds the two pieces together.
- kiko.man
- Posts: 167
- Joined: Mon Mar 28, 2011 5:59 pm
- Location: Sydney
- Real name: Ian
Re: Brembo Bolt Size?
by cruisn » Tue Sep 04, 2012 11:56 pm
The bolts supplied bolt the adapter to the caliper.
The adapter then mounts to the backing plate with the bolts you removed from standard calipers.
You will have to bend back or remove the dust shield.
The adapter then mounts to the backing plate with the bolts you removed from standard calipers.
You will have to bend back or remove the dust shield.
-
cruisn - Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
Re: Brembo Bolt Size?
by kiko.man » Wed Sep 05, 2012 12:10 am
Sorry Mark I just realized I should've worded it better, the bolt size I'm looking for are for the "bolts on the actual caliper that hold the 2 sides of the caliper together, 4 in total on each corner"
- kiko.man
- Posts: 167
- Joined: Mon Mar 28, 2011 5:59 pm
- Location: Sydney
- Real name: Ian
Re: Brembo Bolt Size?
by cruisn » Wed Sep 05, 2012 7:31 am
Ahhhhh ok.
Maybe silly question, but can't you just remove and check from your calipers?
Maybe silly question, but can't you just remove and check from your calipers?
-
cruisn - Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
Re: Brembo Bolt Size?
by kiko.man » Thu Sep 06, 2012 11:02 am
i was hoping not to disassemble the caliper but it looks like i will, might as well learn something new anyway 
- kiko.man
- Posts: 167
- Joined: Mon Mar 28, 2011 5:59 pm
- Location: Sydney
- Real name: Ian
9 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest