by jp928 » Tue Apr 03, 2012 3:24 pm
If you have the broken off part, stick it back together. Drill a 1.5mm hole in each side of the break, as centrally as possible, get a stiff piece of wire (a broken drill ?), assemble, super glue. Note that if you are trying to superglue two parts that dont meet well and the glue wont go off, fill the gap with baking powder, then drop superglue on it - the powder triggers the glue to go off VERY quickly (avoid the cyanide vapour), and it will stay together. Only down side is the join will be brittle, wont tolerate much biffing.
jp 08 gtb 6mt wagon