Engine Bay cleaning methods

Detaling and car washing techniques

Engine Bay cleaning methods

Postby Newbie GT » Tue Dec 03, 2013 7:26 pm

Steam clean or Gerni obviously not near electrical etc

Any methods people use would be appreciated as I'm sure degreaser whitens plastics etc
Newbie GT
Posts: 1533
Joined: Mon May 28, 2012 6:44 pm
Location: Victoria

Re: Engine Bay cleaning methods

Postby Robbks » Wed Dec 04, 2013 8:55 am

remove any plastics on the motor,
degrease the crap out of everything metal
run the engine
use a steam cleaner to hose it all off (removed plastics included)
keep engine running until it's all dry.
replace plastics and go to town with your favourite plastic coating
coyote wrote:Sure, a GTR is fast ... but it's about as interesting as listening to grass grow.
User avatar
Posts: 2185
Joined: Wed Jan 05, 2011 8:21 am
Location: Hobart, Tas
Car: MY06 3.0RB Wagon
Real name: Rob
Profile URL: viewtopic.php?f=10&t=12350

Re: Engine Bay cleaning methods

Postby gen3v8 » Wed Dec 04, 2013 5:25 pm

Be careful with Degreasers. The caustic water based type destroys the appearance of some metals, especially alloys.
Just an old V8 fart that has seen the LIGHT
User avatar
Posts: 406
Joined: Fri May 07, 2010 8:49 pm
Location: South Sydney
Real name: Dave

Re: Engine Bay cleaning methods

Postby 30rbullet » Mon Dec 09, 2013 10:55 pm

Harsh degreaser stains alloy if left on for a period of time which is not very long at all!

I suggest the engine cleaner at car lovers car wash.

Maybe light degreaser like 1km from the car wash. Quickly drive to bay, pop bonnet gernie, use engine cleaner and gernie and done.
Posts: 83
Joined: Fri Dec 06, 2013 8:57 pm
Car: 3.0r gen4 wagon

Return to Detailing

Who is online

Users browsing this forum: No registered users and 1 guest