Page 1 of 2

Post your Dyno Sheets

PostPosted: Wed Jul 12, 2017 9:35 am
by tom_kauf
I couldn't find a thread where we can all post our Dyno Results. So unless I've missed something, that'd be an interesting one to have 8)

And it's easier than having to go through individual people's build threads.
Probably best not to mention the tuner, to avoid the mud-slinging that will follow (but feel free to message people, and I'm sure they'll tell you)

This is not a competition, it's for educational purposes.

List your:
  • Engine (Stock or Built)
  • Transmission Type
  • Fuel you ran
  • Tuned or Factory Tune
  • Engine Performance Mods

Re: Post your Dyno Sheets

PostPosted: Wed Jul 12, 2017 9:45 am
by tom_kauf
  • 2.5L Turbo EJ25 (Stock)
  • 6sp Manual
  • United E85
  • Tuned
  • PhatGT Dump Pipe with 200 cell Cat (rest of exhaust and Intake is Stock)
    Mishimoto TMIC
    Cobb 3-Port
    DW 300c Fuel Pump
    ID1000 Injectors
Result: 192kW (I doubt the Torque of 852Nm is right - that's probably a Dyno calibration issue).
This place didn't tune my car, it's just our only local AWD Dyno.

Image

Re: Post your Dyno Sheets

PostPosted: Wed Jul 12, 2017 10:21 am
by tom_kauf
My friend Tim's GT SpecB:
  • 2.5L Turbo EJ255
  • 5sp Auto
  • 98
  • Tuned
  • X-Force Midpipe (rest of exhaust and Intake is Stock - he had X-Force Mufflers but recently changed to quieter stock 2.5i ones)
    Perrin TMIC
    Blouch 3-Port
    DW 300c Fuel Pump (can run E85 with his other tune but was 98 on this day)
Result: 132kW
This place didn't tune his car, it's just our only local AWD Dyno.

Image

Re: Post your Dyno Sheets

PostPosted: Wed Jul 12, 2017 4:41 pm
by vinshonz
2.5L Turbo EJ255 (stock)
6sp Manual
BP 98
PnP VF52 Turbo
AVO TBE into STi mufflers
AVO panel filter
Mishimoto TMIC
Turbosmart Kompact BOV
Kobe Silicone Intake + SFB
Kobe 340LPH pump
Tuspeed 3Port

Result: Rocked up to a dyno day got 173kW

Image

Re: Post your Dyno Sheets

PostPosted: Wed Jul 12, 2017 5:44 pm
by tom_kauf
Nice! :good:

The more the merrier.

Re: Post your Dyno Sheets

PostPosted: Thu Jul 13, 2017 10:27 am
by SpecB07
2.5L Turbo EJ255 (stock)
6sp Manual
98
Everything stock other than Invidia Dump

Re: Post your Dyno Sheets

PostPosted: Thu Jul 13, 2017 1:11 pm
by tom_kauf
Cool, thank you :). SpecB07, do you have a tune?

I should add a section where people mention if the car is tuned or has the stock tune. (done)
In most cases it's obvious, but not always on basic mods.

Re: Post your Dyno Sheets

PostPosted: Thu Jul 13, 2017 4:55 pm
by vinshonz
i got alot more mods then SPecB07 and only got 7kw more :lol:
ps. yes i know every dyno reads different, im just joking

Re: Post your Dyno Sheets

PostPosted: Thu Jul 13, 2017 10:18 pm
by SpecB07
Car has been tuned, bought it and found out it had possibly been tuned before since it already had the Ecutek licence so they re-tuned it through that :)

Re: Post your Dyno Sheets

PostPosted: Fri Jul 21, 2017 6:16 pm
by andy_mac
EJ20x/y
6mt
BP98
DTech dyno tune

Decatted downpipe
Invidia Q300 catback
DIY FMIC
Grimmspeed 3-port
Silicone turbo inlet
Grimmspeed intake
AEM 320LPH fuel pump
GFB fuel regulator

Result: 192kw

Image

Image

Re: Post your Dyno Sheets

PostPosted: Sat Jul 22, 2017 12:44 am
by jslayz
Image

Mods, alot to do this on dino fuel..... see page 1 of my build. :D 8)

Re: Post your Dyno Sheets

PostPosted: Sat Jul 22, 2017 8:33 am
by tom_kauf
Very nice andy_mac! A good amount of power for 98 and considering it's not that much boost.

And that's awesome jslayz! That's on another level haha :cool:

Re: Post your Dyno Sheets

PostPosted: Mon Jul 24, 2017 1:57 am
by crazyricochet
I love a good pissing contest :lol:

Engine - Forged internals
Transmission Type - 6MT DCCD
Fuel you ran - E85
Almost every supporting mod known to man

Image

Re: Post your Dyno Sheets

PostPosted: Mon Jul 24, 2017 9:02 am
by jslayz
Bloody good!

E85, nowhere to be found over in Perth, unless jerry cans for weekender booo hooo hooo

Re: Post your Dyno Sheets

PostPosted: Mon Jul 24, 2017 10:56 am
by tom_kauf
Awesome! :D