Hi guys,
I am looking to get my Legacy opensource tuned, however I am having trouble finding information regarding the port that I have.
It seems to be different to the ports I generally see I on here, and there is very little information regarding NZDM vehicles around, but I figure AUDM is close enough to get some insight.
Can anybody help me out? Will I be able to go down the opensource route?
The plug is located on the left hand side of the drivers footwell. It also appears that my green test connecters are on the right hand side of the drivers footwell.
New member to the forum so I'm unfamiliar with a few things, if there's anything I should be doing differently let me know.