Grrrr. Got an OBD-II plug for my MY07 Liberty and I can't get the damn thing to work.
I plug it in, enter the WiFi settings as advised and fire up DashCommand. But I end up getting "OBD-II Error: error detecting OBD-II protocol.
So, I did some more research and had to make some more changes like;
ISO/KWP Keep Alive Interval – 2000ms
OBD-II Respones Timeout – 1000ms
Disable OBD-II Mode $09 Support – Checked or On
Minimum Bus Idle Time – 100ms
But still no go.
Anyone else had a similar problem? So frustrating.