So does anyone have data on maximum fuel pump voltage through the oem fuel pump controller at 100% duty cycle?
Looking for ways to try and increase my fuel pump voltage to circa 15 volts at 100% duty
Need 275 litres per hour of flow at 80psi which can only be done on a single pump at 15 volts
I have considered one of these : http://www.kennebell.net/KBWebsite/Acce ... tapump.htm , but I don't know how they'd fare with the stock variable duty fuel pump controller unless I set the stock controller to 100% duty cycle constantly which I don't particularly want to do (as it would heat fuel etc)
Really don't want to go to an external pump or twin pump setup, so any suggestions welcomed
Cheers
Mick