Learning View Snapshots \ Discussions

Tuning, diagnostics, ECUs and associated bits and bytes
Forum rules
Please respect copyright.
Do not post full copies of professionally tuned roms!

Re: Learning View Snapshots \ Discussions

Postby cynner » Wed Jun 14, 2017 9:14 pm

bigBADbenny wrote::good:
So that's not even stock scaling?

Hmm, just checked my stock rom and it's the same as below (other than the airflow ranges that peaks at 40g/s instead of 80g/s). Everything else looks the same though.

Andy is right tho – atmo sensor looks like it's reading artificially high? If it' reading way too high then maybe it's hitting boost error quite a lot (especially at above 5600rpm and 2.0 load which is probably high boost areas) - so the timing being pulled could be pre-emptive rather than actual knock possibly?
User avatar
Posts: 461
Joined: Fri Jul 05, 2013 4:38 pm
Location: Hobart, Tasmania
Car: MY08 GT Wagon
Real name: Kim
Profile URL: viewtopic.php?f=10&t=23586

Re: Learning View Snapshots \ Discussions

Postby bigBADbenny » Wed Jun 14, 2017 9:30 pm

That's all the info right there in the LV, chap pm'd me for advice after reading the tune FAQ, but I did link this thread for feedback, so he may post assuming he has permission if reqd...
User avatar
Posts: 8347
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop

Re: Learning View Snapshots \ Discussions

Postby unisafe » Mon Aug 21, 2017 10:56 am

Hi guys
Just wondering if this screen shot of my torque app can give any insight to why my car is feeling more sluggish than usual...
If this view is garbage I'll later to get learning view up and going with windows on my mac.
I read on the app its only hitting 11psi boost and 10% long term fuel trim? Wondering if that was a red light for something?
Screenshot_20170821-102215.png (72.05 KiB) Viewed 1435 times
Whiteline rear sway bar- Invidia 3" Down pipe-TCP quad mufflers Flex Fuel tune by Matt,running e85
User avatar
Posts: 34
Joined: Mon Dec 01, 2014 12:10 am
Location: Adelaide, South Australia
Car: Subaru Liberty TBSTI 08' Auto-
Real name: Tom

Re: Learning View Snapshots \ Discussions

Postby tom_kauf » Tue Aug 22, 2017 9:22 am

Yeah, a Learning View snapshot would give a better overall impression of the ECU (IAM value and Knock Detected). The values you logged are good for more detailed info though.

Boost does seem low, I noticed that right away as well. Even if you car is stock, you should have more like 14psi. Maybe other guys can look at other values in the graph more closely, but the most important basic values I'd look at are in LV.
[Stealth & Speed - Comfort & Practicality]: My 2008 MY09 GT SpecB Wagon - Manual 185,000km
User avatar
Posts: 1340
Joined: Thu Sep 26, 2013 1:05 pm
Location: Brisbane, QLD
Car: 2008 Liberty GT SpecB Manual Wagon
Real name: Tom

Re: Learning View Snapshots \ Discussions

Postby KiDo_Tuning » Wed Aug 23, 2017 4:17 pm

bigBADbenny wrote::good:
So that's not even stock scaling?

That is stock TBSTI Knock ranges tables

It has had a Airpump delete done by looks of it, with no 'fix' applied
KiDo Racing Tunes Info: HERE

Great minds discuss ideas;
Average minds discuss events;
Small minds discuss people
User avatar
Posts: 2798
Joined: Sun Jun 10, 2012 11:53 pm
Car: Subarus + Nissans
Real name: Matt


Return to Tuning

Who is online

Users browsing this forum: No registered users and 1 guest