Dyno Charts

Tuning, diagnostics, ECUs and associated bits and bytes
Forum rules
Please respect copyright.
Do not post full copies of professionally tuned roms!

Dyno Charts

Postby Natty » Thu Jan 19, 2012 8:59 pm

Posted recently about my the new mods to car but didnt have digital copies of the dyno sheets available.

Car: 2007 Liberty GT STi
Mods : 3" Mandrel bent TBE with custom dump pipe
Chiptorque custom tune with ezy-flash
175kw atw.
Really happy with the car now. Awesome torque and good power through rev range
Ive owned 3 rexies before this and I still hate 1st gear, but 3rd and 4th bring a big smile.

Keen for comments or feedback
Cheers
Attachments
60LTA_Trq.jpg
60LTA_Trq.jpg (94.16 KiB) Viewed 4344 times
60LTA_Bst.jpg
60LTA_Bst.jpg (95.88 KiB) Viewed 4344 times
Natty
 
Posts: 124
Joined: Thu Jan 20, 2011 8:18 pm
Location: Brisbane
Car: 2007 Liberty GT-B STi

Re: Dyno Charts

Postby stew07gt » Thu Jan 19, 2012 10:11 pm

peak power at 4600? seems low, what gear etc is this all in
User avatar
stew07gt
-stickered-
 
Posts: 537
Joined: Thu Feb 10, 2011 6:02 pm
Location: Maitland, NSW
Car: MY05 GT MT (pearl white)
Real name: Stewart
Profile URL: viewtopic.php?f=10&t=14846

Re: Dyno Charts

Postby Smithyy » Thu Jan 19, 2012 10:25 pm

decent numbers mate :)
2007 GT Spec-B Sedan
User avatar
Smithyy
-stickered-
 
Posts: 573
Joined: Wed Sep 28, 2011 1:40 pm
Location: Meadow Springs, WA
Car: 2007 GT Spec-B Sedan
Real name: Michael
Profile URL: viewtopic.php?f=7&t=14961

Re: Dyno Charts

Postby bass_straitener » Thu Jan 19, 2012 11:34 pm

stew07gt wrote:peak power at 4600? seems low, what gear etc is this all in


Says 4th gear at the bottom of the sheet.

I have to agree that peak power is a bit early at 4600RPM. Also your boost seems to drop off too early. I reckon you probably need a 3 port boost solenoid upgrade to help maintain boost.

Boost has also been increased as these cars come out with about 1 bar or 14.67psi

I also recommend a fuel pump upgrade as the first thing you should do.

With regards your custom dump, do you have any pics of the collector? And is that a boost spike I'm also seeing? If so it could be due to your dump pipe design.

I will also say I'm no expert and I could be way off in my interpretation. Hopefully someone like coyote will come along and set us all straight.
"If A is a success in life, then A equals x plus y plus z. Work is x; y is play; and z is keeping your mouth shut."
User avatar
bass_straitener
-stickered-
 
Posts: 2247
Joined: Mon Jul 25, 2011 8:31 pm
Location: Melbourne, Victoria
Car: MY12 C63
Real name: Bruce
Profile URL: viewtopic.php?f=10&t=14781

Re: Dyno Charts

Postby JMlegacy » Wed Jan 30, 2013 2:00 pm

Was this on a 93 tune or 91 gas tune?

nice numbers for the stock turbo. I assume this is a VF45 turbo?
I was about to buy one for my car for 90 gas.

What's this 3 port boot controller I hear about?
JDM LGT 2.0 Gutted
JMlegacy
 
Posts: 117
Joined: Sat Dec 08, 2012 2:46 pm
Car: Legacy GT 2004

Re: Dyno Charts

Postby <GB> » Wed Jan 30, 2013 2:06 pm

JMlegacy wrote:Was this on a 93 tune or 91 gas tune?

nice numbers for the stock turbo. I assume this is a VF45 turbo?
I was about to buy one for my car for 90 gas.

What's this 3 port boot controller I hear about?

our fuel ratings are differnt to over seas we have 98 RON, 95 RON AND 91 RON. Is your fuel rating mesured in roz?
<GB>
 
Posts: 2290
Joined: Tue Nov 22, 2011 9:05 am
Location: MELBOURNE
Car: 08 Liberty STI
Profile URL: viewtopic.php?f=18&t=14660

Re: Dyno Charts

Postby JMlegacy » Wed Jan 30, 2013 2:38 pm

<GB> wrote:
JMlegacy wrote:Was this on a 93 tune or 91 gas tune?

nice numbers for the stock turbo. I assume this is a VF45 turbo?
I was about to buy one for my car for 90 gas.

What's this 3 port boot controller I hear about?

our fuel ratings are differnt to over seas we have 98 RON, 95 RON AND 91 RON. Is your fuel rating mesured in roz?


OK, then i guess I meant to ask if it was tuned for 98 or 95? :)
98RON = 93 US gas
95 = 91
91 = 87
JDM LGT 2.0 Gutted
JMlegacy
 
Posts: 117
Joined: Sat Dec 08, 2012 2:46 pm
Car: Legacy GT 2004

Re: Dyno Charts

Postby <GB> » Wed Jan 30, 2013 3:39 pm

All good lol
<GB>
 
Posts: 2290
Joined: Tue Nov 22, 2011 9:05 am
Location: MELBOURNE
Car: 08 Liberty STI
Profile URL: viewtopic.php?f=18&t=14660

Re: Dyno Charts

Postby SMI77 » Sat Feb 02, 2013 4:41 pm

Very nice.
You may consider a VF52 hairdryer.
This should get 200+ atw, without the need for injectors or fuel pump.
The :D :D :D is heaps bigger :!: :!: :!:
*** Team WAGON *** Team TONY *** Team WAGON *** Team SILVER *** Team WAGON *** Team 08 B4S *** Team WAGON *** Team VF52 *** Team WAGON ***
SMI77
-stickered-
 
Posts: 378
Joined: Tue Jul 29, 2008 9:25 pm
Location: Mansfield, Brisbane, Qld
Car: 08 GTB tbSTi 6mt silver wagon

Re: Dyno Charts

Postby Kekotic » Sat Feb 02, 2013 4:48 pm

SMI77 wrote:Very nice.
You may consider a VF52 hairdryer.
This should get 200+ atw, without the need for injectors or fuel pump.
The :D :D :D is heaps bigger :!: :!: :!:


What is the actual fuel pump duty max for stock? I was under the impression the stock one can't get 200+?
User avatar
Kekotic
-stickered-
 
Posts: 6452
Joined: Tue Jun 08, 2010 6:46 pm
Car: MY07 Liberty GT Spec.B
Profile URL: viewtopic.php?f=10&t=13066

Re: Dyno Charts

Postby dr20t » Sat Feb 02, 2013 5:29 pm

Fk it
Last edited by dr20t on Sat Feb 02, 2013 5:32 pm, edited 1 time in total.
Addicted to corn juice....

My FrankenStien build thread here: viewtopic.php?t=14137
User avatar
dr20t
 
Posts: 4191
Joined: Sun Oct 23, 2011 10:43 pm
Location: South West Sydney NSW
Car: 04 Liberty GT Auto
Real name: Mick
Profile URL: viewtopic.php?t=14137

Re: Dyno Charts

Postby dazzz168 » Sat Feb 02, 2013 6:14 pm

VF52 turbos run well on Stock fueling on the Foresters... 550cc injectors and stock pump (somewhere between 145-165 LPH), same as G3 WRXs. What do the Libertys come standard with?
dazzz168
 
Posts: 313
Joined: Thu Sep 23, 2010 11:43 pm
Location: Lansvale, Sydney
Car: Forester XT & TB STi Lib
Real name: Daz
Profile URL: viewtopic.php?f=10&t=20816

Re: Dyno Charts

Postby Kekotic » Sat Feb 02, 2013 6:16 pm

dazzz168 wrote:VF52 turbos run well on Stock fueling on the Foresters... 550cc injectors and stock pump (somewhere between 145-165 LPH), same as G3 WRXs. What do the Libertys come standard with?

550cc injectors I believe on 2.5 GT, stock pump probably same as what you just said.

Actually very interesting dazzz what you are saying, as everyone on this forum since day one has said VF52 requires bigger injectors and fuel pump. But I know that a member on here made 215kw on E85 with stock injectors (I think?)
User avatar
Kekotic
-stickered-
 
Posts: 6452
Joined: Tue Jun 08, 2010 6:46 pm
Car: MY07 Liberty GT Spec.B
Profile URL: viewtopic.php?f=10&t=13066

Re: Dyno Charts

Postby dr20t » Sat Feb 02, 2013 7:05 pm

I did the calc properly and you need a 120-130lph pump to make 200kw atw using 98 fuel

480cc injectors would be at 100% duty cycle

The 2.5's are claimed to have 550cc injectors although I believe this is closer to 500

Stock injectors would be completely pushing it

Stock pump I don't see supporting required flow at a sustainable pressure for too long. Sure running it at 70psi or so would get you there. But for how long
Addicted to corn juice....

My FrankenStien build thread here: viewtopic.php?t=14137
User avatar
dr20t
 
Posts: 4191
Joined: Sun Oct 23, 2011 10:43 pm
Location: South West Sydney NSW
Car: 04 Liberty GT Auto
Real name: Mick
Profile URL: viewtopic.php?t=14137

Re: Dyno Charts

Postby dazzz168 » Sat Feb 02, 2013 7:22 pm

chaotic2050 wrote:
dazzz168 wrote:VF52 turbos run well on Stock fueling on the Foresters... 550cc injectors and stock pump (somewhere between 145-165 LPH), same as G3 WRXs. What do the Libertys come standard with?

550cc injectors I believe on 2.5 GT, stock pump probably same as what you just said.

Actually very interesting dazzz what you are saying, as everyone on this forum since day one has said VF52 requires bigger injectors and fuel pump. But I know that a member on here made 215kw on E85 with stock injectors (I think?)


Well, On both my Foresters I have run VF52s with TP tunes and never needed to upgrade injectors or fuel pump. I've never had my current Forester (4EAT) on the Dyno yet, but ran it down the 1/4 mile getting 13.4 with a mild 2.5k rpm launch. The car weighed in 1585kg with me inside and quite sure I'll be able to hit lower 13s if I launched harder. Only mods were X-Force Dump pipe and Turbosmart BOV, all else stock.

I guess it really depends on your tuner. :D
dazzz168
 
Posts: 313
Joined: Thu Sep 23, 2010 11:43 pm
Location: Lansvale, Sydney
Car: Forester XT & TB STi Lib
Real name: Daz
Profile URL: viewtopic.php?f=10&t=20816

Next

Return to Tuning

Who is online

Users browsing this forum: Google [Bot] and 3 guests