Page 2 of 2

Re: ECU Datascan replacement including GPS speed

PostPosted: Wed Oct 08, 2014 6:28 pm
by cynner
Nice. What other dashboard displays does it have? (digital/graph view rather than analogue dials?)

Re: ECU Datascan replacement including GPS speed

PostPosted: Wed Oct 08, 2014 11:18 pm
by bigBADbenny
Although Wes MY07 H6 is SSMK, the ECU was not recognized, but this could be because I hadnt submitted the ID to the developer for inclusion.

Gauges or raw values only at the moment :)
See attached log too...
BtSsm_20141008_224747.csv.zip
(5.46 KiB) Downloaded 255 times


Here is a Learnt Values report:

IAM 1.000

A/F Learning (%)
0.00 5.60 21.00 80.10
------------------------
2.10 -6.80 -5.30 0.00

Fine Learning Knock Corr (degs)
0.000 1.500 1.900 2.300 2.700
------------------------------
0000 0.000 0.000 0.000 0.000 0.000
2000 0.000 0.000 0.000 0.000 0.000
2800 0.000 0.000 0.000 0.000 0.000
3600 0.000-0.350 0.000 0.000-1.050
4400 0.000 0.000 0.000-0.700-1.050
5200 0.000 0.000 0.000 0.000 0.000
6000 0.000 0.000 0.000 0.000 0.000

Knock detection report:
KNOCK DETECTED at 2014-10-08 08:02:55 pm
Boost (psi): 1.9
Load (g/rev): 1.50
Battery (V): 14.6
AFR: 13.9
Coolant (degF): 185
FKC (deg): -1.4
FLKC (deg): 0.0
Injector PW (ms): 8.4
Intake (degF): 68
Knocks: 20
MAF (g/s): 68
RPM: 2723
Speed (mph): 59.0
Throttle plate (%): 27.8
Timing (deg): 15.5
VVT Left (deg): 17
VVT Right (deg): 17

Re: ECU Datascan replacement including GPS speed

PostPosted: Fri Oct 10, 2014 6:50 am
by bigBADbenny
Ok so the BtSsm developer has added the definitions for H6.
I'm looking for pre and postFL H6's, and preFL turbos and NA's.
And post 08 GTs and NA's... Then we start on other models :mrgreen:

The latest update has a live dyno feature, just plug in your weight, cd etc and go!

Let me know in detail your special requests :)

Re: ECU Datascan replacement including GPS speed

PostPosted: Fri Oct 10, 2014 7:16 am
by bigBADbenny
As regards flex fuel sensing, if you are using a flex fuel sensor then the analogue output could be displayed via eg a deleted tgv sensor input :)

cynner wrote:Looks good!

A few questions...

- assume it can do FLKC and FBKC?
- can it do basic logging? (either on a graph view or table view?)
- can it do min/max value recall?
- i'm assuming it can't calculate octane rating (for both premium and e85) - but I wonder if that can be a feature request? :) (same way Matt McLeod calculates octane rating for his flex fuel?)

And does anyone know of a tablet that would work with this that fits perfectly in the top console compartment? :) (maybe using the sat-nav surround?). I'd try to have this permanently hooked up...

Re: ECU Datascan replacement including GPS speed

PostPosted: Fri Oct 10, 2014 11:23 am
by bigBADbenny
Here are the supported fields for MY07 GT-B :)

Image
Update: now with metric fields :good:

Re: ECU Datascan replacement including GPS speed

PostPosted: Thu Oct 30, 2014 9:44 pm
by fibble
Thanks heaps for letting me play with your new toy :D .

Da da daaaa.......

Benny and I can now confirm that this device definitely works on a 2005 pre-facelift AUDM Liberty GT........ :mrgreen:

I'm excited and I am ordering one now....

Re: ECU Datascan replacement including GPS speed

PostPosted: Thu Oct 30, 2014 10:47 pm
by bigBADbenny
Www.BtSsm.com - Android app/Bluetooth adapter for 05-09 LGT, 06-09 WRX, 04-09 STi, 04-09 FXT, 05-09 OBXT

New feature: RomRaider logging on BT PC! :P