Page 1 of 2
fitting 2.5 inch quad tips, anyone done this?
Posted:
Thu Sep 09, 2010 8:00 pmby jimbo
hi guys,
was wondering if any one could help?
at present i have 2 inch quad tips but i want the 2.5's we originally ordered. looks like i'll have to cut the kit to fit them though and was just wondering if anyone has fitted 2.5 inch quad tips? and if so how did you go about it
any advice would be great
cheers
Re: fitting 2.5 inch quad tips, anyone done this?
Posted:
Thu Sep 09, 2010 8:15 pmby smythie
yeah, the phat built items were 2.5 inch diameter
Re: fitting 2.5 inch quad tips, anyone done this?
Posted:
Thu Sep 09, 2010 8:35 pmby jimbo
did you have to modify the exhaust cutouts in the rear diffusor? cause it looks like thats the only way to get them to fit with mine
Re: fitting 2.5 inch quad tips, anyone done this?
Posted:
Thu Sep 09, 2010 9:00 pmby smythie
the tips have a curve in them (towards each other) as they leave the muffler.
Re: fitting 2.5 inch quad tips, anyone done this?
Posted:
Thu Sep 09, 2010 9:36 pmby Arith
smythie wrote:the tips have a curve in them (towards each other) as they leave the muffler.
Re: fitting 2.5 inch quad tips, anyone done this?
Posted:
Thu Sep 09, 2010 9:51 pmby Kekotic
God damnit they look good.
Jim, convince PHAT to make more! Saves me dropping 4k on the K2 Gear ones
Re: fitting 2.5 inch quad tips, anyone done this?
Posted:
Sat Sep 11, 2010 3:47 pmby jimbo
Awesome looks like I'll be getting the tips fabricated then instead of cutting the kit, thanks for the help
Re: fitting 2.5 inch quad tips, anyone done this?
Posted:
Sun Sep 12, 2010 6:35 pmby bluedoors
I'm really keen for quads on my My10 GT wagon, hopefully Phat will come to the party and build some.
Re: fitting 2.5 inch quad tips, anyone done this?
Posted:
Sun Sep 12, 2010 7:21 pmby Kekotic
Bluedoors don't count on it.
I have been hounding him for the last couple of months, it is never going to happen.
Re: fitting 2.5 inch quad tips, anyone done this?
Posted:
Mon Sep 13, 2010 1:02 pmby castek
the twins i have are 2.5" if i remember correctly.
not modding was required, but they have worn (melted) a bit of the bumper where they hit it over bumps
Re: fitting 2.5 inch quad tips, anyone done this?
Posted:
Mon Sep 13, 2010 6:29 pmby subarugt
Arith wrote:smythie wrote:the tips have a curve in them (towards each other) as they leave the muffler.
would this one fit my10 gt?
Re: fitting 2.5 inch quad tips, anyone done this?
Posted:
Mon Sep 13, 2010 10:06 pmby smythie
no idea until someone takes the time to test fit.
Re: fitting 2.5 inch quad tips, anyone done this?
Posted:
Sat Sep 25, 2010 11:56 amby blacktop™
chaotic2050 wrote:God damnit they look good.
Jim, convince PHAT to make more! Saves me dropping 4k on the K2 Gear ones
you do realise there are other options inbetween phat quads and k2 gear?
Re: fitting 2.5 inch quad tips, anyone done this?
Posted:
Sat Sep 25, 2010 7:39 pmby Kekotic
Other options that I'm not interested in? yes I realise that, and I am not interested in them.
Re: fitting 2.5 inch quad tips, anyone done this?
Posted:
Sun Sep 26, 2010 12:21 amby Arith
blacktop™ wrote:you do realise there are other options inbetween phat quads and k2 gear?
I think he means the quad system being produced by TCP Auto. That should generate more interest once it's proven and the exhaust note recorded.