Hi guys, i see there is alot of talk about exhausts for the MY10 and not a lot of action.
I have done stacks of research on an "affordable" exhaust for mineand came up with the following:
3 inch Cat back, Polished Stainless Mandrel kit from X-Force. There is not currenty any kits for the MY10 GT Wagon that bolt straight on so most will need some modification.
We tried and MY09 GT kit but it was hopeless - muffler mounts have been reversed, the "Y" section is different and the mid section is too short.
Ended up with an MY10 Forester XT kit......... yep, Forester.
Fits (ALMOST) perfectly. mufflers bolt straight in, "Y" is perfect fit. All flanges bolt on to stock CAT etc. The only thing you will need is about 300mm of stainless welded on the REAR of the resonator.
I had mine done at Right Price Exhausts, Slacks Creek QLD
http://www.rpexhausts.com.au/
cost $1100 fitted, looks and sounds NICE.
Only complaint......
It's still fairly quiet! well sounds like it grew a set of nuts but no "rexy boxer burble"
the pic on my avatar is the back end.
cheers