Gen 1 lib headers on a gen 3

Exhaust modifications

Gen 1 lib headers on a gen 3

Postby cr80442 » Wed Jun 26, 2019 6:48 pm

So usual story I would like to achieve the Subaru rumble on my RX2.5 and I'm aware that UEL headers will kill a little HP on the N/A motors but the car is already pretty slow so it may as well sound good. I have read that Gen 1 UEL headers will fit an EJ25 if both are dual port. My car is a 2000 model so would it be dual port? Ill have a look when I pick it up to be sure. I've also read that on some on gens after the gen 1 the headers come up a bit short where the cat connects and others say they fit straight up. Has anyone put gen 1 headers on their gen 3 and had to lengthen them to fit up to the cat? Any info would be appreciated.
cr80442
 
Posts: 1
Joined: Wed Jun 26, 2019 6:37 pm
Car: Liberty Gen 3 2.5RX
Real name: Oscar

Re: Gen 1 lib headers on a gen 3

Postby craig_ » Mon Jul 08, 2019 1:45 pm

Yeah, they'll fit the heads but you will need to make modifications to the rest of the exhaust.
User avatar
craig_
 
Posts: 56
Joined: Tue May 06, 2014 7:47 pm
Location: Brisbane
Car: MY03 RX & MY10 XT
Real name: Craig


Return to Exhausts

Who is online

Users browsing this forum: No registered users and 6 guests