Page 1 of 1

Uel headers for a 2.5i n/a?

PostPosted: Sun Feb 26, 2017 12:44 am
by ngent45
I'm going to be getting an xforce mild steel catback for my non turbo 2.5 and was wondering if there are any uel headers for this setup? I've seen quite a few uel headers but I think they're only for gt models, any help would be apprexiTes!

Re: Uel headers for a 2.5i n/a?

PostPosted: Sun Feb 26, 2017 8:05 am
by Surge
From memory, the gen 1 liberty had UEL headers on the na version.

They should fit.

Otherwise Borla replicas were also popular a little while ago.

I also enjoyed how loud my gen 4 2.5i was when I put on a stock 2014-2017 wrx mid pipe and quads.

It hung low (hangers needed adjustment), and the quad tips wouldn't fit the bumper cut out. But it sounded great!

Re: Uel headers for a 2.5i n/a?

PostPosted: Sun Feb 26, 2017 5:38 pm
by ngent45
Surge wrote:From memory, the gen 1 liberty had UEL headers on the na version.

They should fit.

Otherwise Borla replicas were also popular a little while ago.

I also enjoyed how loud my gen 4 2.5i was when I put on a stock 2014-2017 wrx mid pipe and quads.

It hung low (hangers needed adjustment), and the quad tips wouldn't fit the bumper cut out. But it sounded great!


sorry, I should've mentioned i have a 2004 gen IV

Re: Uel headers for a 2.5i n/a?

PostPosted: Sun Feb 26, 2017 8:16 pm
by Surge
Yeah I figured that was the case.

Pretty sure the gen 1 headers fit the gen 4.

As long as you get the 4 exhaust port version.

Not sure if you can find Borla replicas anymore but they should be even better.


I used to have a 2008 gen 4 2.5i and a gen 1 liberty.