Wrx quad exhaust on 2010 Liberty gt

Exhaust modifications

Wrx quad exhaust on 2010 Liberty gt

Postby 432-r » Tue Nov 22, 2016 1:00 pm

Hi all,
I've recently acquired a 2010 Liberty gt wagon.

I was looking at exhausts and shapes and have a specific question.

Could I take a cat back quad tips from a 2012 wrx and get it to fit my wagon?

I mean moving hangers etc is fine at an exhaust shop. The rear section (shape wise) looks identical between the two cars.

What would be required ? Bit of lengthening or is it just fundamentally not going to happen with stuff like diffs being in the way etc. happy to move hangers, increase via extension.

Any experience appreciated -
Thanks
432-r
 
Posts: 3
Joined: Tue Aug 23, 2011 10:16 am
Car: MY06 wrx
Real name: Pedros

Re: Wrx quad exhaust on 2010 Liberty gt

Postby Surge » Tue Nov 22, 2016 5:18 pm

I believe the mid pipe back will bolt up.
I haven't tried on my gen V yet.

But I did bolt up a 2014 wrx exhaust and quad tips to my Gen 4 when I had it. So basically it bolted up to the mid section and had to adjust hangers otherwise it hung too low.

I will be looking at doing the same to my 2010 GT when I find the right wrx exhaust. I want the one I had before because the resinator was more of a hotdog shape which I liked.

PS I also just bought a 2014 wrx sti steering wheel to fit my 2010 GT. I'll let you know how that goes.
DIY romraider E85 tuned Subaru liberty GT Premium 2010 Auto.
New project: Lexus Soarer 2.5gtt jzz30 1992

[ACT]Free Tune help- Learning view, Romraider, ECU Flash
User avatar
Surge
 
Posts: 804
Joined: Sat Dec 08, 2012 1:28 pm
Location: ACT
Car: 2010 lib GT premium + Jzz30 soarer

Re: Wrx quad exhaust on 2010 Liberty gt

Postby muzza » Tue Nov 22, 2016 6:26 pm

viewtopic.php?f=55&t=26598

I suspect that the centre section will need lengthening. I doubt the WRX centre section is in any way better than the Lib GT centre so save some grief.
Rear cans will bolt on, flange bolts are front/rear, hangers are pretty right but tips will need cutting off and new ones to suit rear bumper.

I'd like to hear about the WRX steer wheel, looks pretty sweet as a cheaper-than-DAMD upgrade.
Muzza
MY13 GT wagon auto.
Kido Tuned, STI quad-mufflers, Resonator-ectomy, GFB plumback BOV, SG Motorsport AOS, Perrin steering damper lockdown, grille, not finished yet....
User avatar
muzza
 
Posts: 483
Joined: Thu Apr 11, 2013 11:31 am
Location: Eastern Melbourne
Car: MY13 Liberty GT wagon
Real name: Murray

Re: Wrx quad exhaust on 2010 Liberty gt

Postby Surge » Wed Nov 23, 2016 8:50 pm

muzza wrote:
I'd like to hear about the WRX steer wheel, looks pretty sweet as a cheaper-than-DAMD upgrade.


I'll be sure to post a thread here about that.

Aside from the wheel, I just bought the wrx 2015 exhaust with the nicer resinator.
http://www.ebay.com.au/itm/Subaru-WRX-M ... SwImRYM9hi

I'll try to fit this over the weekend maybe.
Should sound fantastic.
However because of my bumper / body kit, I'll need to cut the tips off haha.
DIY romraider E85 tuned Subaru liberty GT Premium 2010 Auto.
New project: Lexus Soarer 2.5gtt jzz30 1992

[ACT]Free Tune help- Learning view, Romraider, ECU Flash
User avatar
Surge
 
Posts: 804
Joined: Sat Dec 08, 2012 1:28 pm
Location: ACT
Car: 2010 lib GT premium + Jzz30 soarer

Re: Wrx quad exhaust on 2010 Liberty gt

Postby Surge » Sat Nov 26, 2016 8:00 pm

So I can confirm 2 things, the quad tip mufflers bolt on just fine.

Sadly the mid pipe with the hotdog resinator is too short (maybe 15cm).

Which is bad news for me because I think the best sound comes from that resinator over the stock one that we have.

I might be needing to lengthen it at some point, otherwise it's a waste.
DIY romraider E85 tuned Subaru liberty GT Premium 2010 Auto.
New project: Lexus Soarer 2.5gtt jzz30 1992

[ACT]Free Tune help- Learning view, Romraider, ECU Flash
User avatar
Surge
 
Posts: 804
Joined: Sat Dec 08, 2012 1:28 pm
Location: ACT
Car: 2010 lib GT premium + Jzz30 soarer


Return to Exhausts

Who is online

Users browsing this forum: No registered users and 3 guests