club.liberty.asn.au

I'm just wondering if this will fit my car. I have a preface lift 2.5L (EJ25) gen 4 liberty and i'm buying xforce headers with A hurricane cat off a fellow member. Now this came off a facelift ej20 2.0 will there be any issues.
I'm a newbie so give me a break haha.

Shakibsaifi wrote:I'm just wondering if this will fit my car. I have a preface lift 2.5L (EJ25) gen 4 liberty and i'm buying xforce headers with A hurricane cat off a fellow member. Now this came off a facelift ej20 2.5 will there be any issues.
I'm a newbie so give me a break haha.

There's no 2.5L EJ20 - it will be the EJ25.

And yes, there are no substantial differences in the NA cars between pre-FL and post-FL in the sense of the exhaust.

Manaz wrote:

Shakibsaifi wrote:I'm just wondering if this will fit my car. I have a preface lift 2.5L (EJ25) gen 4 liberty and i'm buying xforce headers with A hurricane cat off a fellow member. Now this came off a facelift ej20 2.5 will there be any issues.
I'm a newbie so give me a break haha.

There's no 2.5L EJ20 - it will be the EJ25.

And yes, there are no substantial differences in the NA cars between pre-FL and post-FL in the sense of the exhaust.

I don't want to rain on this parade but I would do a bit more extra research... I KNOW that an Xforce system for a 2.0R preface does NOT line up with a preface 2.5, comes up short. I know because I tried to swap it before I traded my old Lib in... in the end I left the exhaust (from the cat to the end of Y pipe with a straight pipe in the middle) and stuck on stock mufflers... as I could take the X Force mufflers off. Considering you are changing the front end of the exhaust, it should be ok as Manaz said... but if it is from the cat down to the Y pipe, you may have issues...

d-chang wrote:

Manaz wrote:

Shakibsaifi wrote:I'm just wondering if this will fit my car. I have a preface lift 2.5L (EJ25) gen 4 liberty and i'm buying xforce headers with A hurricane cat off a fellow member. Now this came off a facelift ej20 2.5 will there be any issues.
I'm a newbie so give me a break haha.

There's no 2.5L EJ20 - it will be the EJ25.

And yes, there are no substantial differences in the NA cars between pre-FL and post-FL in the sense of the exhaust.

I don't want to rain on this parade but I would do a bit more extra research... I KNOW that an Xforce system for a 2.0R preface does NOT line up with a preface 2.5, comes up short. I know because I tried to swap it before I traded my old Lib in... in the end I left the exhaust (from the cat to the end of Y pipe with a straight pipe in the middle) and stuck on stock mufflers... as I could take the X Force mufflers off. Considering you are changing the front end of the exhaust, it should be ok as Manaz said... but if it is from the cat down to the Y pipe, you may have issues...

To be clear - it has to be 2.5L to 2.5L, or 2.0L to 2.0L (all NA). You can't swap headers from a 2.0 turbo to a 2.5l turbo, or from NA to turbo (or vice versa).

Manaz wrote:To be clear - it has to be 2.5L to 2.5L, or 2.0L to 2.0L (all NA). You can't swap headers from a 2.0 turbo to a 2.5l turbo, or from NA to turbo (or vice versa).

Yes exactly.. I think the nature of this post is that he is trying to fit an ej20 set up onto an ej25...

http://forum.liberty.asn.au/viewtopic.php?f=68&t=15041

Will this fit.

Shakibsaifi wrote:http://forum.liberty.asn.au/viewtopic.php?f=68&t=15041

Will this fit.

To be honest, I am not too sure... I just know the end parts of the exhaust won't fit..

I just had a quick google... and came across this... of course your situation is the reverse..

http://www.ausubaru.com/forum/showthread.php?t=23332