club.liberty.asn.au

Looking at these two dump pipe options, which on would you recommend

Ultrexperformance SS with 100cel cat
http://bit.ly/1kBDyJQ

Vs

Xforce mild steel with 100 cel cat or maybe 200 cel
http://www.bestmufflers.com/bshop/product_info.php?cPath=119_331&products_id=5120&osCsid=d9b43b4c015c57da638d196780caae89

Will be running stock cat back for now

Cam

Did anyone have an opinion on this?
I'm looking to buy one soon!
Also twin tip mufflers for a 2007 spec b Wagon

I'm going to get the x-force mild steel dump-pipe. I bought a complete system with a pre-face lift auto dump, so dont need the cat when I change it over.

Went with a mild steel system coz its suits my budget, and have read it has a deeper note.

That said any 08+ WRX dump pipe should fit from what I have found.

Sounds like you know what you want Cameron. Post up a review when you get it fitted.

I personally have chosen a s/s 3" Invidia dump purchased from Pro Speed Performance online. Has the cat inline and will match the s/s Ultrex cat back I already have fitted nicely.

Although, it's horses for courses. I do not doubt the mild steel XForce unit you have bought will do nearly as good as job as the Invidia in terms of performance.

The Xforce guys won't confirm that the dump pipe fits the liberty.
I have tried them directly and also through a few exhaust shops.
I want one but everyone is telling me not too.

CHOCKEY wrote:The Xforce guys won't confirm that the dump pipe fits the liberty.
I have tried them directly and also through a few exhaust shops.
I want one but everyone is telling me not too.

There is a few on here that have fitted them, but you do so at your own risk. There may be a chance you will need to get your exhaust shop to modify them to fit if need be. If your car is manual, chances are they should fit. Auto's have a harder time finding dumps that do fit, hence the reason Im going for the Invidia unit which plainly states it will fit Australian Auto LGT's.

http://www.prospeedracing.com.au/produc ... Down-Pipe-"AUSTRALIAN-SPEC"-with-Hi-Flow-Cat-suit-07%252d09-Liberty-BL5-AUTOMATIC.html

CHOCKEY wrote:The Xforce guys won't confirm that the dump pipe fits the liberty.
I have tried them directly and also through a few exhaust shops.
I want one but everyone is telling me not too.

Yeah from all my research the xforce for a WRX 08+ will fit the manual without a problem. I'm kicking myself for not getting one earlier as the Mild steel dump went up $70 at the start of April...

Sounds good, does the Invidia fit the standard center pipes after the dump?
Might have a crack at installing myself.

CHOCKEY wrote:Sounds good, does the Invidia fit the standard center pipes after the dump?
Might have a crack at installing myself.

From what I know, yes. But I'd ask Troy for confirmation.