Guys,
When stock mufflers yes stock mufflers are bolted back up to the car there seems to not be much movement in y pipe as in when mufflers are in hangers etc
Is this a bad thing ? Hope I've explained properly
bigBADbenny wrote:Ignore K, he can occasionally be really helpful and nice!
bigBADbenny wrote:Theres enough flex to align the muffs with king size zip ties if need be.
But first do the muffler nuts up medium tight, then align, then tighten hard!
Ignore K, he can occasionally be really helpful and nice!
Newbie GT wrote:bigBADbenny wrote:Theres enough flex to align the muffs with king size zip ties if need be.
But first do the muffler nuts up medium tight, then align, then tighten hard!
Ignore K, he can occasionally be really helpful and nice!
Thanks Benny !
Yeh did that at it seems that it feels very rigid so was concerned about the y pipe being fixed tight like that with not much play...
chaotic2050 wrote:bigBADbenny wrote:Ignore K, he can occasionally be really helpful and nice!
Helpful the first time he asked this question. This is probably the 5th time now
chaotic2050 wrote:bigBADbenny wrote:Ignore K, he can occasionally be really helpful and nice!
Helpful the first time he asked this question. This is probably the 5th time now
seanmau5 wrote:Newbie GT wrote:bigBADbenny wrote:Theres enough flex to align the muffs with king size zip ties if need be.
But first do the muffler nuts up medium tight, then align, then tighten hard!
Ignore K, he can occasionally be really helpful and nice!
Thanks Benny !
Yeh did that at it seems that it feels very rigid so was concerned about the y pipe being fixed tight like that with not much play...
Is that the way it was when you removed the stock mufflers?
bigBADbenny wrote:More info please.
But zorst components are durable by nature so as long as the alignment is good u should be ok...
bigBADbenny wrote:As long as all the rubber cookies for the hangers inc the one near the rear diff are in place and the zorst isn't contacting the body or heat sheilds you'll be fine.
Eg stock muffs: cookies vertical/prova muffs: cookies horizontal.
Because different shape cans, provas are a lot smaller than stock.
Users browsing this forum: No registered users and 8 guests