X-Force WRX Quads
Posted:
Tue Apr 09, 2013 7:12 pmby Phoenix
Does anyone know if the X-Force WRX Quads fit through the Bumper tunnel on a Gen4 Liberty?
I'm thinking of trying them out, but I don't know if it will clear the tunnel. I'm pretty sure it has the same connection to the Y pipe, as a regular Lib exhaust... but It's more or less whether the Tips will hit the bumper, or even clear it at all..
Anyone happen to know about it?
Re: X-Force WRX Quads
Posted:
Tue Apr 09, 2013 7:20 pmby zch91
Not sure which model of WRX exhausts you're talking about, but
viewtopic.php?f=55&t=19427
Re: X-Force WRX Quads
Posted:
Tue Apr 09, 2013 7:23 pmby Phoenix
Yeah, that looks like them a bit...
Talking about these ones here:
http://www.bestmufflers.com/bshop/produ ... a57fc3eac0
Re: X-Force WRX Quads
Posted:
Thu Apr 25, 2013 8:15 pmby dle
will need to do some modifications as the wrx flanges are different to the Libs. also you will need to measure the cut outs and measure the width of the tips.
I tried the widebody wrx mufflers on a Pre-FL but they dont fit the cut out. even if you were to customise them, the tips put together don't physically fit.
Re: X-Force WRX Quads
Posted:
Thu Apr 25, 2013 10:07 pmby Phoenix
dle wrote:will need to do some modifications as the wrx flanges are different to the Libs. also you will need to measure the cut outs and measure the width of the tips.
I tried the widebody wrx mufflers on a Pre-FL but they dont fit the cut out. even if you were to customise them, the tips put together don't physically fit.
Cheers, Mate.
That pretty much answers my question.