X-Force WRX Quads

by **Phoenix** » Tue Apr 09, 2013 7:12 pm

Does anyone know if the X-Force WRX Quads fit through the Bumper tunnel on a Gen4 Liberty?

I'm thinking of trying them out, but I don't know if it will clear the tunnel. I'm pretty sure it has the same connection to the Y pipe, as a regular Lib exhaust... but It's more or less whether the Tips will hit the bumper, or even clear it at all..

Anyone happen to know about it?

by **zch91** » Tue Apr 09, 2013 7:20 pm

Not sure which model of WRX exhausts you're talking about, but

viewtopic.php?f=55&t=19427

by **Phoenix** » Tue Apr 09, 2013 7:23 pm

zch91 wrote:Not sure which model of WRX exhausts you're talking about, but

viewtopic.php?f=55&t=19427

Yeah, that looks like them a bit...

Talking about these ones here:
http://www.bestmufflers.com/bshop/produ ... a57fc3eac0

by **dle** » Thu Apr 25, 2013 8:15 pm

will need to do some modifications as the wrx flanges are different to the Libs. also you will need to measure the cut outs and measure the width of the tips.

I tried the widebody wrx mufflers on a Pre-FL but they dont fit the cut out. even if you were to customise them, the tips put together don't physically fit.

by **Phoenix** » Thu Apr 25, 2013 10:07 pm

dle wrote:will need to do some modifications as the wrx flanges are different to the Libs. also you will need to measure the cut outs and measure the width of the tips.

I tried the widebody wrx mufflers on a Pre-FL but they dont fit the cut out. even if you were to customise them, the tips put together don't physically fit.

Cheers, Mate.

That pretty much answers my question.

X-Force WRX Quads

X-Force WRX Quads

Re: X-Force WRX Quads

Re: X-Force WRX Quads

Re: X-Force WRX Quads

Re: X-Force WRX Quads

Who is online