club.liberty.asn.au

Hey man, got any of these little bad boys left?

andyjs2 wrote:Hey man, got any of these little bad boys left?

Sure do . I'll send you a PM shortly with the details.

We've now sold out of these, and the US creator discojon offered to send us the 3D Model File.

Would anyone have access to a 3D Printer to make these? I don't have access to one, so we'll see how we make/distribute these from now on.

I bought a 3D printer a few weeks ago. I'll let you know when it's setup and going.

3rspecb wrote:I bought a 3D printer a few weeks ago. I'll let you know when it's setup and going.

Ok, cool . We found someone local here in North QLD who can probably do it, but good to know we have another option if that doesn't work out. I don't have the file yet, so that'll be the next step.

Any luck guys?
I need some!

stocky wrote:Any luck guys?
I need some!

We have successfully 3D printed a prototype locally . We're still in the process of getting ones made that we can sell. But shouldn't take much longer.

I'll update this page as soon as we have them. Thanks for your interest.

When they get produced again I'd probably be interested in a couple, it will at least rule out it's not my dash rattling if it doesn't help!

Does anyone have an easy way of fitting these to the dash?

shav wrote:Does anyone have an easy way of fitting these to the dash?

They just wedge in between the dash and the windscreen. The gaps seem to vary between cars depending on windscreen replacements, but they should all have a spot where they fit snugly. If the DRS fits tightly, they stay there without moving.

A piece of string through the DRS helps if you accidentally drop it (I did a few times). When the DRS is in place, simply cut the string.

tom_kauf wrote:

shav wrote:Does anyone have an easy way of fitting these to the dash?

They just wedge in between the dash and the windscreen. The gaps seem to vary between cars depending on windscreen replacements, but they should all have a spot where they fit snugly. If the DRS fits tightly, they stay there without moving.

A piece of string through the DRS helps if you accidentally drop it (I did a few times). When the DRS is in place, simply cut the string.

Thanks for the tip Tom.

We've now got the first few locally made DRSs .

I've messaged the few people who expresses an interest. For anyone else, it'll be a few weeks before we'll have more made. But after that we'll be back to normal and have stock available.

Would love some mate, any available.

Adictions wrote:Would love some mate, any available.

We've sold the ones made in the initial run. But we'll soon have the proper production run happening. I'll let you know when they're ready

Ill buy some more tom.
I droped a couple prior to learning your string trick haha