Dash Rattle Stopper - 3D Printed

Organise a group buy here. You need "approved seller" status to start a group buy topic.
club.liberty.asn.au branded gear will also be posted here.

Re: Dash Rattle Stopper - 3D Printed

Postby tom_kauf » Thu Apr 09, 2015 10:44 pm

kiwigene wrote:Mine arrived too.thanks Tom.

peadya100 wrote:Received mine today too.. thank you!!


Sweet! 8)
[Stealth & Speed - Comfort & Practicality]: My 2008 MY09 GT SpecB Wagon - Manual 200,000km
User avatar
tom_kauf
-stickered-
 
Posts: 1362
Joined: Thu Sep 26, 2013 1:05 pm
Location: Brisbane, QLD
Car: 2008 Liberty GT SpecB Manual Wagon
Real name: Tom

Re: Dash Rattle Stopper - 3D Printed

Postby bigBADbenny » Fri Apr 10, 2015 8:58 am

Many thanks! Arrived yesterday :good:
User avatar
bigBADbenny
 
Posts: 10420
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop

Re: Dash Rattle Stopper - 3D Printed

Postby Mav954 » Fri Apr 10, 2015 9:10 am

Still any left??
User avatar
Mav954
 
Posts: 96
Joined: Thu Jan 03, 2013 7:04 pm
Location: Hervey Bay
Real name: Brady

Re: Dash Rattle Stopper - 3D Printed

Postby tom_kauf » Fri Apr 10, 2015 9:35 am

Good to hear BBB :).

Mav954 wrote:Still any left??

Yes, PM sent :).
[Stealth & Speed - Comfort & Practicality]: My 2008 MY09 GT SpecB Wagon - Manual 200,000km
User avatar
tom_kauf
-stickered-
 
Posts: 1362
Joined: Thu Sep 26, 2013 1:05 pm
Location: Brisbane, QLD
Car: 2008 Liberty GT SpecB Manual Wagon
Real name: Tom

Re: Dash Rattle Stopper - 3D Printed

Postby Lib 3.0LR » Fri Apr 10, 2015 2:18 pm

Still Waiting for mine :( Hope there not lost in the post :(
Silver wagon MY06 3.0LR/18' STI Enkei rims/STI front lip/STI pedels/STI mufflers/STI flexible bar/HKS panel air filter/Clarion CeNET iPod interface EA1251 /HID lights-fogs 6000k/Led parkers/Bilstien- Eibach springs / Corazon Grill /Brembo's-Dixel pads/goodride-brakelines./Cusco: BRAKE CYLINDER STOPPER /.Valenti Japan LED Tail Light/In Car PC,JDM Front Bar /KiDo Tune more TBA ?[size=85]
User avatar
Lib 3.0LR
 
Posts: 1188
Joined: Thu Aug 13, 2009 9:08 pm
Location: Sydney
Car: MY06 LIBERTY 3.0LR WAGON.
Real name: George

Re: Dash Rattle Stopper - 3D Printed

Postby EVL20T » Fri Apr 10, 2015 5:01 pm

Got mine today :D
EVL20T
 
Posts: 45
Joined: Tue Mar 31, 2015 12:59 am
Location: Newcastle, NSW
Car: Liberty
Real name: Mikey

Re: Dash Rattle Stopper - 3D Printed

Postby peadya100 » Thu May 14, 2015 2:03 pm

Has anyone tried to install their rattle stoppers yet? I just got around to trying mine and the gap between my dash and windscreen is far too big for the rattle stopper... as this windscreen is only about 1 year old I'm guessing they installed it incorrectly?
Diamond Works SI-DRIVE Covers - Subaru Liberty/Legacy MY07 to MY09

https://www.facebook...aruDiamondWorks
subaru.diamondworks@gmail.com
User avatar
peadya100
-stickered-
 
Posts: 2243
Joined: Wed Dec 08, 2010 1:21 pm
Location: Norah Head, Central Coast
Car: 2007 Liberty GT-B Wagon
Real name: Adam
Profile URL: viewtopic.php?f=10&t=21072

Re: Dash Rattle Stopper - 3D Printed

Postby tom_kauf » Thu May 14, 2015 2:31 pm

peadya100 wrote:Has anyone tried to install their rattle stoppers yet? I just got around to trying mine and the gap between my dash and windscreen is far too big for the rattle stopper... as this windscreen is only about 1 year old I'm guessing they installed it incorrectly?


Yeah, page 8 of this thread has some good pics. The recommendation was 8-10 inches from the left pillar. I installed mine months after the first people got theirs, so I was slow as well. Mine had too much of a gap at 8 inches from the side, but the gap got smaller towards the middle. I ended up being able to fit mine at 10 inches from the side. But that was with one of the largest stoppers in the original 'multi-size' set (vs the newer stronger set that is all the same size). So even in the middle of the dash, yours doesn't fit?
And did you get one of the multi-size sets, or are all of yours in the set the same size (the newer stronger set)?

There was a thread where a guy had windscreen installed so poorly, that his wiper arm scraped. Turns out they didn't remove the old glue properly.

EDIT: This one viewtopic.php?f=6&t=29286
[Stealth & Speed - Comfort & Practicality]: My 2008 MY09 GT SpecB Wagon - Manual 200,000km
User avatar
tom_kauf
-stickered-
 
Posts: 1362
Joined: Thu Sep 26, 2013 1:05 pm
Location: Brisbane, QLD
Car: 2008 Liberty GT SpecB Manual Wagon
Real name: Tom

Re: Dash Rattle Stopper - 3D Printed

Postby peadya100 » Thu May 14, 2015 3:27 pm

No I got the one size fits all pack.

I'm getting a rubbing/grinding sound at 80kph at the top of my windshield... I'm guessing it's sitting too close at the top due to it being too far out from the bottom.
Diamond Works SI-DRIVE Covers - Subaru Liberty/Legacy MY07 to MY09

https://www.facebook...aruDiamondWorks
subaru.diamondworks@gmail.com
User avatar
peadya100
-stickered-
 
Posts: 2243
Joined: Wed Dec 08, 2010 1:21 pm
Location: Norah Head, Central Coast
Car: 2007 Liberty GT-B Wagon
Real name: Adam
Profile URL: viewtopic.php?f=10&t=21072

Re: Dash Rattle Stopper - 3D Printed

Postby tom_kauf » Thu May 14, 2015 5:32 pm

Oh, that does sound weird :? . The windscreen shouldn't be affected by the DRS. It's bonded in to be a structural component in a crash. The DRS just puts a bit of tension on the dash.
[Stealth & Speed - Comfort & Practicality]: My 2008 MY09 GT SpecB Wagon - Manual 200,000km
User avatar
tom_kauf
-stickered-
 
Posts: 1362
Joined: Thu Sep 26, 2013 1:05 pm
Location: Brisbane, QLD
Car: 2008 Liberty GT SpecB Manual Wagon
Real name: Tom

Re: Dash Rattle Stopper - 3D Printed

Postby klam » Fri May 22, 2015 12:42 am

I'm interested so I hope I'm not late to the party... are there any left I could order?
Except this occasional rattling, I also get the really loud clank noise coming from right, somehwere between the key lock and the window. this noise only happens when riding on some uneven road or I hit something (roundabout e.g.).

Also, is there any dash de-re-assembly how-to on our forums? Thanks!
klam
 
Posts: 149
Joined: Mon Jan 30, 2012 6:55 pm
Location: Sydney
Car: Subaru Liberty 2006 4GEN MY06 2.0R
Real name: Michael

Re: Dash Rattle Stopper - 3D Printed

Postby tom_kauf » Fri May 22, 2015 1:11 am

PM sent.:)
[Stealth & Speed - Comfort & Practicality]: My 2008 MY09 GT SpecB Wagon - Manual 200,000km
User avatar
tom_kauf
-stickered-
 
Posts: 1362
Joined: Thu Sep 26, 2013 1:05 pm
Location: Brisbane, QLD
Car: 2008 Liberty GT SpecB Manual Wagon
Real name: Tom

Re: Dash Rattle Stopper - 3D Printed

Postby tom_kauf » Fri May 22, 2015 9:31 am

Now the PM has gone through. Sorry, I was half asleep late last night. You should have a PM now though.

Edit: Regarding the other noises, see if the Rattle Stopper helps first and then investigate further. I haven't seen a Dash removal guide, but I'm sure the US LegacyGT forum would have one.
[Stealth & Speed - Comfort & Practicality]: My 2008 MY09 GT SpecB Wagon - Manual 200,000km
User avatar
tom_kauf
-stickered-
 
Posts: 1362
Joined: Thu Sep 26, 2013 1:05 pm
Location: Brisbane, QLD
Car: 2008 Liberty GT SpecB Manual Wagon
Real name: Tom

Re: Dash Rattle Stopper - 3D Printed

Postby klam » Fri May 22, 2015 11:48 am

I've extracted this from the manual... start at page 4
Attachments
subaru_dash_removal_GEN4_Liberty.pdf
Dash Removal GEN4 Liberty
(252.5 KiB) Downloaded 243 times
klam
 
Posts: 149
Joined: Mon Jan 30, 2012 6:55 pm
Location: Sydney
Car: Subaru Liberty 2006 4GEN MY06 2.0R
Real name: Michael

Re: Dash Rattle Stopper - 3D Printed

Postby catbert6 » Tue Jun 09, 2015 11:11 am

I know I am very late to this but I will ask anyway - are there any left? :)
Bob
Canberra
2018 Outback 3.6R
2006 Impreza 2.0R
catbert6
 
Posts: 42
Joined: Wed Sep 11, 2013 8:59 pm
Car: 2004 Liberty GT
Real name: Bob

PreviousNext

Return to Group Buys and Club Liberty accessories

Who is online

Users browsing this forum: No registered users and 6 guests