Dash Rattle Stopper - 3D Printed

[fibble]

Hey Tom,

I'm in.....

[Reidy]

I'm interested.

[dav_28]

I want one

[discojon]

Please keep in mine this was designed for the USDM 4th gens. Not sure what years that crosses over to down under

[tom_kauf]

Good morning, discojon from LGT and Emergentprinting here. I'd be glad to do a group buy for you guys to save on postage but let me clear one thing up. The free postage is only for the US unfortunately. I'm just not big enough to be able to ship free internationally. By the time I am shipping these here in the US I barely break even as it is, which is fine. The postage for 20 of these will be $15 combined to one member in AUS who can then distribute however. I'll update the store to reflect this international postage. As was mentioned, I produce several other things also and am open to your ideas. Check out the awesome cubby gauge pod install by cypher 0177

Cool, no problem . I was very surprised when I entered Australia into the shipping calculator and it said it was free. $15 sounds great, but you can double-check if it will be more. I've PMd you my address on LGT, but I think the postage won't change much (if at all) depending on address within Australia.

Yes, I've seen the other items incl cubby gauge pod . So if anyone else is interested in those, let me know and we may be able to combine postage.

[tom_kauf]

Hey Tom,
I'm in.....

I'm interested.

I want one

Done

[tom_kauf]

Please keep in mine this was designed for the USDM 4th gens. So the same years roughly (basically same chassis and interior anyway). Not sure what years that crosses over to down under

Yes, most of the dash rattles are on 4Gens as well here. So roughly the same years (but the same chassis and interior). From what I've read, the rattles mainly come from the LH-side - in both Aus and US. So for us, most rattle stopper will be put on the passenger side, but still on the LH side. So apart from that, I'm sure they will work great. Especially because they come in different sizes. So even if there are small differences in dash gaps between USDM and ours, we will be fine - I'll take that risk.

[tom_kauf]

Discojon was kind enough to include a 3D Printed Cubby Gauge Pod for free . It's very cool! But I have a Nav screen, and want to keep more of a stealth look - so it's not as suited for my car.

So we might have expressions of interest on who wants it, and draw a winner out of the hat?

Actually, can someone confirm these would fit? Because I don't recall our cars having that display underneath .

[Reidy]

I'd say that's a pre facelift. There's a clock under the post facelift so I'd assume it's the same but I'm not 100%.

[BigBCalais]

I'll grab a set too, for preventative measures haha

[discojon]

The cubby gauge pod replaces the flip up cubby door. I know the JDM lecagys and the usdm spec b has a monitor there for navigation. If someone would post a photo of their dash I should be able to verify fitment.

[Caution]

2 gauge pod slightly angled towards the driver And being able to close the cubby Would be the goods.

[discojon]

I don't currently have anything developed to fit that bill but it looks like another member here in the States has something he is working on. http://legacygt.com/forums/showthread.p ... 34020.html

Not sure if the door gets retained and still works or not thought. I could work something up though...

[discojon]

GB Update:

I have the 1/5th of the total order printed. The smallest of the the spacers just completed printing.

[tom_kauf]

The cubby gauge pod replaces the flip up cubby door. I know the JDM lecagys and the usdm spec b has a monitor there for navigation. If someone would post a photo of their dash I should be able to verify fitment.

Nav was a $3000 option, even on SpecBs here iirc. And now that I've looked a few pictures, I notice the clock. My car has a nav, so I just didn't notice it as clearly before. It'll definitely fit most of our cars .