Dash Rattle Stopper - 3D Printed

[bigBADbenny]

I could go 4 moar please, no rush

[tom_kauf]

I could go 4 moar please, no rush

Ok. I don't have any left now, but when we get some more I'll send u some.

[kiwigene]

Please put me down for a set if they come in. Thanks.

[discojon]

Sorry it has taken me so long to get back with you guys. I have had some turnover in machines and now have a shiny new Lulzbot Taz 5 printer churning out work nicely. I have redesigned the DRS kit based on feedback and every dimension had been reinforced to fix the issues the first one had. A new reinforcing strut was added down the center to mitigate torsional and shear forces. I did away with the multiple sizes and all of them are now 10mm tall. Since these are so much beefier I feel confident that one or two should suffice anyone, but the kit still includes 5 as before. I will try to get a couple hundred of these ready to ship to Tom later in the week. Tom can handle the disbursement of these parts but i'd appreciate it if you guys would do the following:

1. If you ordered one of the first kits a while back you will get a free replacement from me through Tom. All I ask is that you send him 1$ to offset the cost of shipping.

2. If you did not get in on the first order and want a set, the cost is 5$ for 5 pieces, Paid to Tom.

Tom, I will PM you more details.

Sorry if you had any issues with the first set of DRS, Hopefully this will make it right / better!



-Your right side up friend,

DiscoJon

[Jiyujin]

Thank you for your work and time in improving these stoppers. I'm very grateful for the effort you have put into this project and I'm sure forum members who have bought these stoppers cannot thank you and Tom enough. Will certainly make the contribution to offset the shipping, and am looking forward to receiving them. Hope it's warming up for you over there.

Tom, let me know your bank details.

Cheers!
Al

Sorry it has taken me so long to get back with you guys. I have had some turnover in machines and now have a shiny new Lulzbot Taz 5 printer churning out work nicely. I have redesigned the DRS kit based on feedback and every dimension had been reinforced to fix the issues the first one had. A new reinforcing strut was added down the center to mitigate torsional and shear forces. I did away with the multiple sizes and all of them are now 10mm tall. Since these are so much beefier I feel confident that one or two should suffice anyone, but the kit still includes 5 as before. I will try to get a couple hundred of these ready to ship to Tom later in the week. Tom can handle the disbursement of these parts but i'd appreciate it if you guys would do the following:

1. If you ordered one of the first kits a while back you will get a free replacement from me through Tom. All I ask is that you send him 1$ to offset the cost of shipping.

2. If you did not get in on the first order and want a set, the cost is 5$ for 5 pieces, Paid to Tom.

Tom, I will PM you more details.

Sorry if you had any issues with the first set of DRS, Hopefully this will make it right / better!



-Your right side up friend,

DiscoJon

[peadya100]

I'm interested in some of these!

[discojon]

Current progress

[Jiyujin]

Very nice!

[tom_kauf]

Thanks DiscoJon, looking good!

I've changed this thread title, since it's no longer a group buy.

PM me if anyone still wants a replacement. There shouldn't be many (if any), because once installed they were reliable.

I'm away from home until Sunday, so I'll reply to everyone with my Bank Details once I can. There will be plenty of time for the payments before the new DRSs arrive.

[discojon]

Thanks tom for distributing these again. I'll get them shipped today! I'm sending 40 sets of 5 pieces each.

[discojon]

Box shipped yesterday!

[tom_kauf]

Box shipped yesterday!

Awesome, thanks discojon.

[plattsy]

where do i sign up! i own 2 subarus, so my life is one constant rattlle!

[SIMBAT]

i just cut a few 55*degree wedges of pine with my electric saw, sprayed them black...works a treat!

[tom_kauf]

I'm back home, and I've PM'd everyone. Let me know if I've missed you, or you'd also like a set.

Tom