club.liberty.asn.au

bigBADbenny wrote:

Updated pics soon.
Basically the length of the bracket will be increased to give more room to move seats forward if required eg for rear seat comfort or for wagons if flipping the rear seats flat.
It will also allow for rigid plastic fire extinguisher mounts to be used, where those are supplied with your extinguisher.
The new brackets will be slotted across so no drilling will be required for mounting most extinguisher brackets.

OZFoz member Russgt (login req'd) has made custom laser cut fire extinguisher brackets, I think they're awesome!

russgt wrote:If we get 5 people per side we can send them for $XX + $X postage or send them all to one location perhaps cheaper?

20 people we will do for $XX +$X postage. I cant go much lower than that as they get up around that price to make.

If there are any people in Perth they can also get a fire extinguisher that is tagged with it for $XXX all up.

russgt wrote:It will fit GC8 as I have made the bracket
interchangeable. The holes are slightly slotted because some models,
(late model cars) have 415mm centre to centre holes, and older models
have 420mm.

russgt wrote:the reason I did the
bracket design this way was specifically to clear the amp hump in the
liberty. Then by coincidence I realised they fitted the wrx/foz etc.

Also the liberty pictured has full movement. It is close but still
works. (Dependant on fire extinguisher.) I recommend the 1kg Super Cheap
Auto ones that will be on sale in a week or 2 for $20 BTW.

GB EOI is cross posted on
WRX Club
SubyClub

Please post your EOI, comments and discussion!



Liberty GT Spec B

What: Fire extinguisher brackets laser cut out of aluminium, hand finished and powder coated gloss black: will not chip, bolts up to most Lib front seat front bolts, Gen4 confirmed...
Who: Subarus: Passenger side and drivers side both in imminent development...
Where: russgt in Perth
Why: one fire ext is great, 2 even better!
When: as soon as this GB closes at XX orders...

Expressions of Interest:
Round 3 EOI Open, Lead time 4 weeks or less for pics and pricing.
1 cllui NSW ?
2 HardwareBoB VIC ?
3 SH30RB NSW ?
4 JDC VIC passenger side


Round 2 EOI Open: Lead time 2 weeks: 01/11/13
1 Hyrax NSW
2 Hyrax NSW
3 PUDZ3.0RB NSW
4 stocky NSW
5 Famma VIC
6 jmlop VIC
All paid and sent afaik


Round 1 Closed:
1a BBB VIC PAID
1b BBB VIC (if drivers side becomes available) PAID
2 zch91 NT PAID
3 bosc0 VIC PAID
4 ez30rb NSW PAID
5 <GB> VIC PAID
5 Caution QLD PAID
7 Hyrax NSW PAID
8 Hyrax NSW PAID
9 Jaydece VIC PAID
10 Mat04 NSW PAID
11 Sti_lib NSW PAID
12 jay.ritchie VIC PAID
13 WIDELOAD QLD PAID
14 db1 NSW PAID
15 rooby ACT PAID
16 3rspecb VIC PAID
17 lump_a_charcoal NSW PAID
All paid all sent

bigBADbenny wrote:Both will be redone longer.
Sell your shorty to a racer

bigBADbenny wrote:All or nothing, am I right Simon?