Page 1 of 15

Kap Ind Fire Extinguisher Bracket '89-'14 Subaru Group Buy

PostPosted: Mon Oct 14, 2013 8:54 pm
by bigBADbenny
Image


Image


Image


Image

The new Kap Industries fire extinguisher brackets for Subaru 89-14 are in!
$50 each posted special price for y'all :)

Use this link to PM me for the discount code!

Info here:
http://kapindustries.com.au/?product=wr ... er-bracket

PMing EOIs with the code now :)

Installed pics soooon :P

Basically the length of the bracket will be increased to give more room to move seats forward if required eg for rear seat comfort or for wagons if flipping the rear seats flat.
It will also allow for rigid plastic fire extinguisher mounts to be used, where those are supplied with your extinguisher.
The new brackets will be slotted across so no drilling will be required for mounting most extinguisher brackets.

OZFoz member Russgt (login req'd) has made custom laser cut fire extinguisher brackets, I think they're awesome!
russgt wrote:If we get 5 people per side we can send them for $XX + $X postage or send them all to one location perhaps cheaper?

20 people we will do for $XX +$X postage. I cant go much lower than that as they get up around that price to make.

If there are any people in Perth they can also get a fire extinguisher that is tagged with it for $XXX all up.


russgt wrote:It will fit GC8 as I have made the bracket
interchangeable. The holes are slightly slotted because some models,
(late model cars) have 415mm centre to centre holes, and older models
have 420mm.


russgt wrote:the reason I did the
bracket design this way was specifically to clear the amp hump in the
liberty. Then by coincidence I realised they fitted the wrx/foz etc.

Also the liberty pictured has full movement. It is close but still
works. (Dependant on fire extinguisher.) I recommend the 1kg Super Cheap
Auto ones that will be on sale in a week or 2 for $20 BTW.




GB EOI is cross posted on
WRX Club
SubyClub

Please post your EOI, comments and discussion!

Image

Liberty GT Spec B

What: Fire extinguisher brackets laser cut out of aluminium, hand finished and powder coated gloss black: will not chip, bolts up to most Lib front seat front bolts, Gen4 confirmed...
Who: Subarus: Passenger side and drivers side both in imminent development...
Where: russgt in Perth
Why: one fire ext is great, 2 even better!
When: as soon as this GB closes at XX orders...

Expressions of Interest:
Round 3 EOI Open, Lead time 4 weeks or less for pics and pricing.
1 cllui NSW ?
2 HardwareBoB VIC ?
3 SH30RB NSW ?
4 JDC VIC psgr
5 WIDELOAD QLD psgr
6 cllui NSW PSGR
7 Jiyujin QLD psgr & drvr
8 MattyB QLD psgr
9 pattyfox NSW psgr
10 Josh Mcay VIC psgr


Round 2 EOI Open: Lead time 2 weeks: 01/11/13
1 Hyrax NSW
2 Hyrax NSW
3 PUDZ3.0RB NSW
4 stocky NSW
5 Famma VIC
6 jmlop VIC
All paid and sent afaik :)


Round 1 Closed:
1a BBB VIC PAID
1b BBB VIC (if drivers side becomes available) PAID
2 zch91 NT PAID
3 bosc0 VIC PAID
4 ez30rb NSW PAID
5 <GB> VIC PAID
5 Caution QLD PAID
7 Hyrax NSW PAID
8 Hyrax NSW PAID
9 Jaydece VIC PAID
10 Mat04 NSW PAID
11 Sti_lib NSW PAID
12 jay.ritchie VIC PAID
13 WIDELOAD QLD PAID
14 db1 NSW PAID
15 rooby ACT PAID
16 3rspecb VIC PAID
17 lump_a_charcoal NSW PAID
All paid all sent ;)

Re: EOI: Kap Industries Fire Extinguisher Brackets

PostPosted: Mon Oct 14, 2013 8:55 pm
by bigBADbenny

Re: EOI: Kap Industries Fire Extinguisher Brackets

PostPosted: Mon Oct 14, 2013 9:07 pm
by Mat04
These look to be quality made and super light weight.

Re: EOI: Kap Industries Fire Extinguisher Brackets

PostPosted: Mon Oct 14, 2013 9:10 pm
by zch91
Mmmmmm yes put me down please.

Should put the GB on ozfoz too to get more numbers. :D

Re: EOI: Kap Industries Fire Extinguisher Brackets

PostPosted: Mon Oct 14, 2013 9:53 pm
by bigBADbenny
zch91 wrote:Mmmmmm yes put me down please.

Should put the GB on ozfoz too to get more numbers. :D


I'm just posting this for russgt, plus I like this sorta bling ;)

Mat04 wrote:The only downside is you can't move the seat full forward as the extinguisher gets in the way.

I'm thinking 2x 1KG extinguishers for a little more clearance maybe.

Re: EOI: Kap Industries Fire Extinguisher Brackets

PostPosted: Mon Oct 14, 2013 9:54 pm
by zch91
Yeh.. But I couldn't see a GB on OzFoz.. The more the merrier..

Re: EOI: Kap Industries Fire Extinguisher Brackets

PostPosted: Mon Oct 14, 2013 9:58 pm
by mynameisdaniel
Happy to be corrected but I don't think these will work in the Liberty as we have a hump for the amplifier wiring.. When I made my bracket I had to add in another pair of bends to clear this hump...

$3 from bunnings and you can make your own pretty easily and have full adjustment of the seat :)

Re: EOI: Kap Industries Fire Extinguisher Brackets

PostPosted: Mon Oct 14, 2013 10:01 pm
by zch91
The above pic is fitted to a Gen4 GT-B

Re: EOI: Kap Industries Fire Extinguisher Brackets

PostPosted: Mon Oct 14, 2013 10:05 pm
by bigBADbenny
Also available on Club WRX...

mynameisdaniel wrote:Happy to be corrected but I don't think these will work in the Liberty as we have a hump for the amplifier wiring.. When I made my bracket I had to add in another pair of bends to clear this hump...

$3 from bunnings and you can make your own pretty easily and have full adjustment of the seat :)


I like this one as its soooo clean. :mrgreen: :mrgreen: :mrgreen:
I'ma gunna buy some to test out, but if the vendor says it fits... it should fit :)

Re: EOI: Kap Industries Fire Extinguisher Brackets

PostPosted: Mon Oct 14, 2013 10:19 pm
by bigBADbenny
zch91 wrote:Yeh.. But I couldn't see a GB on OzFoz.. The more the merrier..


You now have further confirmation that Lib Club members are special.
Ozfoz members can come here to get em' :)

I'm looking into power coating the extinguishers blue and getting some NOS stickers :P

Re: EOI: Kap Industries Fire Extinguisher Brackets

PostPosted: Mon Oct 14, 2013 11:35 pm
by paggaz
bigBADbenny wrote:I'm looking into power coating the extinguishers blue and getting some NOS stickers :P

Not the first to think of it ;) :lol:

Image

We painted the bracket black after this shot which made it look even more legit.

Re: EOI: Kap Industries Fire Extinguisher Brackets

PostPosted: Tue Oct 15, 2013 12:13 am
by bigBADbenny
Super long hose! Is it an extinguisher or a fire bomb?

Re: EOI: Kap Industries Fire Extinguisher Brackets

PostPosted: Tue Oct 15, 2013 5:34 am
by bosc0
Interest expressed if they make it to 20+ units.

Re: EOI: Kap Industries Fire Extinguisher Brackets

PostPosted: Tue Oct 15, 2013 6:16 am
by ez30rb
interested

Re: EOI: Kap Industries Fire Extinguisher Brackets

PostPosted: Tue Oct 15, 2013 6:48 am
by paggaz
bigBADbenny wrote:Super long hose! Is it an extinguisher or a fire bomb?

Yeah it's an extinguisher. The hose is purely for looks