club.liberty.asn.au

I've got the Grom IPD3.http://www.cushieaudio.com.au/subaru-ipd3.html Everything else is the same.

Well I had to pull the fucker out to get model number of my McIntosh apparently it works on mine. Well I might actually buy two if the price is ok. Put one in the Mrs Lib as well. I'm in Melbourne guys so someone will have to post them to me if we go for it. Who will be doing the ordering?

I would want....

2 x Units
2 x Ipod/Iphone
2 x Usb
1 x Blutooth

Let me know guys. Thanks

Famma wrote:Well I had to pull the fucker out to get model number of my McIntosh apparently it works on mine. Well I might actually buy two if the price is ok. Put one in the Mrs Lib as well. I'm in Melbourne guys so someone will have to post them to me if we go for it. Who will be doing the ordering?

I would want....

2 x Units
2 x Ipod/Iphone
2 x Usb
1 x Blutooth

Let me know guys. Thanks

Forgot to say I have Satnav so as long as it won't interfere with it!

Will check with them for you

I'm interested but I'm in Melb as well so it would be great to be able to get a delivered price in there once you have confirmed the price.

Is there an easier way to find the H/U without pulling the thing out? I've got a MY07 Spec B.

Well I'm going to pick them up from the supplier in Wollongong so I'm guessing $20 bucks at most to post it from Sydney to melb that's just a guess
With the head unit no
Maybe if you call subaru they could tell you or manual might say

Subaru can't help you I've tried that in the past , only way is to remove the sucker and have a look on the top of the stereo for the model number

MY02B4 wrote:I'm interested but I'm in Melb as well so it would be great to be able to get a delivered price in there once you have confirmed the price.

Is there an easier way to find the H/U without pulling the thing out? I've got a MY07 Spec B.

It's not that hard to pop it out, 2 side moulds and ashtray that clip off, 6 screw, around 15mins.

Famma wrote:

Famma wrote:Well I had to pull the fucker out to get model number of my McIntosh apparently it works on mine. Well I might actually buy two if the price is ok. Put one in the Mrs Lib as well. I'm in Melbourne guys so someone will have to post them to me if we go for it. Who will be doing the ordering?

I would want....

2 x Units
2 x Ipod/Iphone
2 x Usb
1 x Blutooth

Let me know guys. Thanks

Forgot to say I have Satnav so as long as it won't interfere with it!

OK so this is the reply i got


Ok... not 100% sure in that instance.
I do know that the PF-28241 is supported but not sure if it still is when their is a sat nav involved
So long as the rear CD changer port is free then it should be fine.
Even if the sat nav pluigs into that port the supplied GROM cable is a Y cable so you can plug it inline with exisiting cabling

Nipple06 wrote:

Famma wrote:

Famma wrote:Well I had to pull the fucker out to get model number of my McIntosh apparently it works on mine. Well I might actually buy two if the price is ok. Put one in the Mrs Lib as well. I'm in Melbourne guys so someone will have to post them to me if we go for it. Who will be doing the ordering?

I would want....

2 x Units
2 x Ipod/Iphone
2 x Usb
1 x Blutooth

Let me know guys. Thanks

Forgot to say I have Satnav so as long as it won't interfere with it!

OK so this is the reply i got


Ok... not 100% sure in that instance.
I do know that the PF-28241 is supported but not sure if it still is when their is a sat nav involved
So long as the rear CD changer port is free then it should be fine.
Even if the sat nav pluigs into that port the supplied GROM cable is a Y cable so you can plug it inline with exisiting cabling

Thanks Nigel, I'll try and have a better look on the weekend.

So I found out my model is the PF-2824I and I pressume its the same model in all post facelift GTs.

I couldn't get a good picture of the rear of the unit but I assume the square shaped port in the top left (if looking from the front) is the cd port that this unit plugs into?

On a side note, my phone is too big to fit into the cubby. Has anyone seen holders than can kinda retract in/out of the cubby cos I'm not a big fan of sticking it on the windscreen.

Ok that's great
Well there are vents that fit or buy a spare cubby and a dremel
I have a iPhone 4 and a 3GS fits ok

Can't say i'm a huge fan of the vent ones cos it blocks the air and i dont think it's a good idea to have hot air heating up the phone The cubby is the ideal spot especially when the phone gets taken out eventually and there's no need to remove the windscreen mount everytime you park. I'll check on ebay if there's anything suitable.

Can anyone confirm if the cd port is the small square one in the corner? I don't have satnav and I saw two unused ports at the back so I pressume the small square one is the one this unit plugs into. Where is a photo of the back of the h/u when you need one - can never find one when I need it!

EDIT: This looks the goods.

http://www.cubbymounts.com/2005-2009.html

its one of the larger rectangular ones. I can't remember which.

The plug looks like this


edit: If only that mount was retractable.

db1 wrote:...
its one of the larger rectangular ones. I can't remember which.
...

i26: Power, Illumination, Antenna Amp power

i86: Navigation System

i85: Steering wheel controls, and misc functions depending upon year.

CeNET: External CD changer.