Headers Uel, El & Twin Scroll

Headers Uel, El & Twin Scroll

Postby ULTREX » Sat Nov 27, 2010 2:06 pm

Ultrex Performance Headers available in Unequal Length, Equal Length & Twin Scroll - only $580 a set

Suitable for Subaru WRX, STI, Forester and Liberty. Something for everyone and nothing but the very very best quality. Please check yourself which headers are suitable for your application.


These high quality Ultex Performance headers are available at this special introductory price of only $580 per set (gst inclusive)

Headers are on the way and will arrive in Perth around 6 Dec - but we may ship from our overseas office direct to you via express prior to the 6th Dec stock arriving.
2 types of Unequal Length headers
1 type of Equal Length headers
1 type of Twin Scroll headers


Unequal Length headers and up pipe - $580
(2 bolt design - can mount to factory and most aftermarket up pipes) - includes fitting kit . Bonus that if you blow a gasket- these are easily sourced and replaced due to the 2 bolt design. These flanges are approx 12mm thick and perfectly flat! Pipes are integrated to ports like a piece of art!
Image
ORDER FROM HERE http://www.ultrex.com.au/subaru-headers-unequal-length-with-up-pipe-p-375.html


=======================


UEL headers and up pipe - $580 (3 bolt up pipe design) - includes fitting kit
Image
ORDER FROM HERE http://www.ultrex.com.au/subaru-headers-unequal-length-with-up-pipe-p-377.html

=======================


EL - headers and up pipe -$580 (3 bolt up pipe design) - includes fitting kit
Image
ORDER FROM HERE http://www.ultrex.com.au/subaru-headers-equal-length-with-up-pipe-p-376.html

=======================
Twin Scroll EL headers and up pipe - $580 (3 bolt up pipe design) - excludes fitting kit
Image
ORDER FROM HERE http://www.ultrex.com.au/subaru-headers-twin-scroll-equal-length-with-up-pipe-p-378.html

=======================

Heat wrap tape is also on the way if you feel the need!

Stock should be here around the 6th December.

Features
Full Mandrel bends with precision tig welding throughout
All Stainless Steel - pipes and flanges
Lost Wax made 4-1 connector with smooth inner surface for better flow
2 bolt or 3 bolt up pipe flange design (UEL only)
3 bolt up pipe flange design for EL and Twin Scroll
45mm inner up pipe to speed up exhaust air speeds.
Slip joint brackets


These are very high quality headers with full mandrel bends and quality welding through out.

Stock is very limited as this introductory price!


Cheers

Rob
Ultrex Performance
http://www.ultrex.com.au

BEST BANG FOR YOUR BUCK IN PERFORMANCE PARTS!
Image
User avatar
ULTREX
 
Posts: 583
Joined: Tue Feb 05, 2008 3:23 pm
Location: Perth

Re: Headers Uel, El & Twin Scroll

Postby hamish_023 » Sat Nov 27, 2010 2:51 pm

Equal length and twin scroll? Difference? :?

so is that $580 delivered?
User avatar
hamish_023
 
Posts: 3608
Joined: Mon Aug 10, 2009 8:21 pm
Location: Adelaide
Car: Black Liberty GT
Profile URL: viewtopic.php?f=10&t=10013

Re: Headers Uel, El & Twin Scroll

Postby blacktop™ » Sat Nov 27, 2010 3:08 pm

There's two types of unequal length headers and one type of equal length headers for single scroll I assume.

Then theres one type of twin scroll headers (which looks like it's equal lenth)

Are the twin scroll headers able to be bolted to the 2.5 and vice versa?
Image
User avatar
blacktop™
 
Posts: 2163
Joined: Tue Dec 15, 2009 3:47 pm
Location: Sydney, Lower North Shore
Car: MY07 GT spec.B wagon 6MT
Real name: ryan

Re: Headers Uel, El & Twin Scroll

Postby 05GTLIBERTY » Sat Nov 27, 2010 4:33 pm

Look just like the AVO ones but $400 cheaper
05GTLIBERTY
 
Posts: 330
Joined: Thu Oct 01, 2009 6:45 pm
Location: Raymond Terrace
Car: MY05 GT Liberty Manual
Real name: Lloyd

Re: Headers Uel, El & Twin Scroll

Postby rickerty » Sat Nov 27, 2010 4:58 pm

My apologies if I have missed some info but... Turbo only or will one of these fit the N/A?
[MY08/Lib/ej25/5MT/Limited Ed./SatNav/TeamWagon!]
HKS | MOMO | HID/LED | BILSTEIN
User avatar
rickerty
-stickered-
 
Posts: 394
Joined: Mon Sep 13, 2010 7:32 pm
Location: Melbourne, South East
Car: MY08/LTD/EJ25/5MT/WAGON
Real name: Rick

Re: Headers Uel, El & Twin Scroll

Postby tangcla » Sat Nov 27, 2010 6:03 pm

What are the expected gains from these?
www.tangcla.com - photography

Canon 5D Mark III x2 | 16-35mm f/2.8L | 24-70mm f/2.8L IS | 70-200mm f/2.8L IS
100mm f/2.8L IS macro | 200mm f/2.0L IS | 580EX-II x2 | 430EX-II | PocketWizard TT1/TT5
User avatar
tangcla
 
Posts: 7409
Joined: Wed Aug 15, 2007 1:47 pm
Location: Melbourne, VIC
Car: B6 Audi S4 (4.2L V8)
Real name: Clarence
Profile URL: http://www.tangcla.com

Re: Headers Uel, El & Twin Scroll

Postby overl0ad » Sat Nov 27, 2010 6:29 pm

hehe clarance... you tempted ei...
tangcla wrote:I didn't have to. I have girly Asian hands :lol:
User avatar
overl0ad
 
Posts: 1089
Joined: Wed May 16, 2007 8:46 pm
Location: Mel-burn!!!
Car: MY07 GTB 6MT
Real name: Gerald

Re: Headers Uel, El & Twin Scroll

Postby ULTREX » Sat Nov 27, 2010 8:47 pm

Hi Guys lots of questions so I will work through them and if I miss you, do ask again! :D

Yes the unequal length headers are both single scroll
The equal length headers are single scoll

The twin scroll headers are equal length.

Correct me if I am wrong but the MY04-06 is twin scroll turbo and the MY07-09 is single scroll turbo - so header to suit.

These can work on any EJ20/EJ25 Subaru engine - the gains to be expected are really dependent upon supporting mods. You would benefit most with a tune but from my readings - 15hp sounds like a figure that gets thrown around - Again - that will depend on supporting mods - suggest do your own research to ensure these are right for your application.

Yes these do look remarkable like the Avo headers. There is a very very very good reason for that. We purchase them from the main quality header manufacturer in Asia. Many of the top JDM top of the line performance brands AND other 'well know' Australian brands rebrand these headers as their own products. So you could easily pay another $500 for the same header from the same factory if you cared to :)

The WRX guys runing EJ20 (2 litres) with single scroll turbos that go down the equal length or twin scroll path upgrade path also found that they need to replace the sump with the 2.5 sump. However I am not sure if that is the same with the Liberty at this stage.

Prices are including GST but exclude delivery... delivery is about $40 to most of Aus but to find out exactly - add one to your cart and then click calculate shipping button and enter your postcode.....

Cheers
Rob
Image
User avatar
ULTREX
 
Posts: 583
Joined: Tue Feb 05, 2008 3:23 pm
Location: Perth

Re: Headers Uel, El & Twin Scroll

Postby hamish_023 » Sun Nov 28, 2010 8:52 am

Is this some thing you are considering keeping in stock or a more of a group buy?

Reason i ask is that pre Christmas not the best month for spending cash on mods. :?
User avatar
hamish_023
 
Posts: 3608
Joined: Mon Aug 10, 2009 8:21 pm
Location: Adelaide
Car: Black Liberty GT
Profile URL: viewtopic.php?f=10&t=10013

Re: Headers Uel, El & Twin Scroll

Postby tangcla » Sun Nov 28, 2010 9:15 am

So what does the fitting kit involve? I notice the twin scroll one excludes it.
www.tangcla.com - photography

Canon 5D Mark III x2 | 16-35mm f/2.8L | 24-70mm f/2.8L IS | 70-200mm f/2.8L IS
100mm f/2.8L IS macro | 200mm f/2.0L IS | 580EX-II x2 | 430EX-II | PocketWizard TT1/TT5
User avatar
tangcla
 
Posts: 7409
Joined: Wed Aug 15, 2007 1:47 pm
Location: Melbourne, VIC
Car: B6 Audi S4 (4.2L V8)
Real name: Clarence
Profile URL: http://www.tangcla.com

Re: Headers Uel, El & Twin Scroll

Postby ULTREX » Sun Nov 28, 2010 11:19 am

These will be kept in stock - some already in stock - others arrive in a week.

Fitting kit = gaskets and bolts
Image
User avatar
ULTREX
 
Posts: 583
Joined: Tue Feb 05, 2008 3:23 pm
Location: Perth

Re: Headers Uel, El & Twin Scroll

Postby rickerty » Sun Nov 28, 2010 4:20 pm

I'm assuming that's a no? None of these will fit an N/A 2.5l?
[MY08/Lib/ej25/5MT/Limited Ed./SatNav/TeamWagon!]
HKS | MOMO | HID/LED | BILSTEIN
User avatar
rickerty
-stickered-
 
Posts: 394
Joined: Mon Sep 13, 2010 7:32 pm
Location: Melbourne, South East
Car: MY08/LTD/EJ25/5MT/WAGON
Real name: Rick

Re: Headers Uel, El & Twin Scroll

Postby ULTREX » Mon Nov 29, 2010 6:04 pm

rickerty wrote:I'm assuming that's a no? None of these will fit an N/A 2.5l?

I think not - certainly not without some custom work
Image
User avatar
ULTREX
 
Posts: 583
Joined: Tue Feb 05, 2008 3:23 pm
Location: Perth

Re: Headers Uel, El & Twin Scroll

Postby rickerty » Tue Nov 30, 2010 11:18 am

Dammit! :roll:

Do Ultrex ever get in N/A headers? I suppose it depends on demand and availability...
[*sorry to de-rail, was genuinely interested in these.]
[MY08/Lib/ej25/5MT/Limited Ed./SatNav/TeamWagon!]
HKS | MOMO | HID/LED | BILSTEIN
User avatar
rickerty
-stickered-
 
Posts: 394
Joined: Mon Sep 13, 2010 7:32 pm
Location: Melbourne, South East
Car: MY08/LTD/EJ25/5MT/WAGON
Real name: Rick

Re: Headers Uel, El & Twin Scroll

Postby Hobba » Thu Jan 13, 2011 5:56 pm

Anyone installed these... Results?
HyperFlow TMIC | HyperFlow Air Intake | AVO Dump Pipe | HKS ES Premium Exhaust | ECUTEK Type 2
Cusco Strut Brace w/BCS | F&R Cusco Sway Bars | Cusco HD Rear SB Mounts | Whiteline Anti-lift Kit
HKS Hipermax III BBTUNE Coilovers |18" Enkei EMK3 Hyper Silver
User avatar
Hobba
 
Posts: 138
Joined: Sun Mar 21, 2010 10:44 am
Location: Balhannah, South Australia
Car: Liberty GT MY05 Black
Real name: Matt

Next

Return to ULTREX

Who is online

Users browsing this forum: No registered users and 1 guest