![Image](http://i1338.photobucket.com/albums/o694/hks180/46351_462387230008_1142724_n.jpg)
With GenV the parker is exposed, therefore i didn't really want to use big LED parker as it will look ugly so i went for the T10 - 1.5W LED parker but if you don't mind the look then you can try other parker with more LED.
![Image](http://i1338.photobucket.com/albums/o694/hks180/562143_10150890595020009_1754052501_n.jpg)
T10 - 1.5W - $15/pair
Xenon Low Beam
![Image](http://i1338.photobucket.com/albums/o694/hks180/226957_10150210462045009_5665218_n.jpg)
![Image](http://i1338.photobucket.com/albums/o694/hks180/40715_462562160008_575961_n.jpg)
As the car came with factory xenon the temp looks like 4000 to 4300k (warm white - white with tinge of yellow) So i've replace the low beam bulb to 5000k D2S bulb - (Pure white). Might try the 6000k down the track.
![Image](http://i1338.photobucket.com/albums/o694/hks180/485769_10151085203875009_1910434847_n.jpg)
D2S 5000 or 6000k bulb - $50/pair
![Image](http://i1338.photobucket.com/albums/o694/hks180/36039_462577080008_6223623_n.jpg)
With GenV is lot easier to replace the number plate lights as you don't need special tools to remove the clips (sedan anyway)
![Image](http://i1338.photobucket.com/albums/o694/hks180/38196_437380115008_4553244_n.jpg)
T10 - 5SMD LED - $15/pair
Map Light
![Image](http://i1338.photobucket.com/albums/o694/hks180/44231_462386110008_132662_n.jpg)
6SMD Festoon LED will do the job just right - but if you want really bright light then you can try using 12,16 or 24 SMD LED panel
![Image](http://i1338.photobucket.com/albums/o694/hks180/38196_437380125008_1485953_n.jpg)
6SMD Festoon LED - $20/pair
Dome Light
![Image](http://i1338.photobucket.com/albums/o694/hks180/44231_462386105008_3133008_n.jpg)
24SMD LED Panel and Dome light is exactly same as Gen IV.
![Image](http://i1338.photobucket.com/albums/o694/hks180/63823_462387115008_2246636_n.jpg)
24SMD LED Panel - $30ea
Door - courtesy light
![Image](http://i1338.photobucket.com/albums/o694/hks180/65452_462562210008_7842507_n.jpg)
I used the T10 - 5SMD , but if you want it brighter you can use the 12 SMD LED Panel.
![Image](http://i1338.photobucket.com/albums/o694/hks180/38196_437380115008_4553244_n.jpg)
T10 - 5SMD - $15/pair
Boot
![Image](http://i1338.photobucket.com/albums/o694/hks180/33611_462386040008_3592865_n.jpg)
Standard
![Image](http://i1338.photobucket.com/albums/o694/hks180/63384_462386205008_4761338_n.jpg)
3 x (5050) 30cm LED strips
![Image](http://i1338.photobucket.com/albums/o694/hks180/63384_462386200008_237544_n-1.jpg)
Now it lights up the whole boot and lot brighter !
5050SMD LED Strip - $15/30cm strip - 3 x $15 = $45
If you got any question feel free to ask.
Leo